SBTN01 Datasheet, PDF (3/4 Pages) Mean Well Enterprises Co., Ltd. – 1W SMD Package DC-DC Unregulated Converter

1W SMD Package DC-DC Unregulated Converter
SBTN01 series
SPECIFICATION
VOLTAGE RANGE
L: 4.5 ~ 5.5Vdc , M: 10.8 ~ 13.2Vdc , N: 21.6 ~ 26.4Vdc
SURGE VOLTAGE (100ms max.) 5Vin models : 9Vdc ; 12Vin models : 16Vdc ; 24Vin models : 30Vdc
INPUT
FILTER
PROTECTION
Internal capacitor
Fuse recommended. 5Vin models: 750mA Slow-Blow Type, 12Vin models: 300mA Slow-Blow Type, 24Vin models: 150mA Slow-Blow Type
INTERNAL POWER DISSIPATION 500mW
VOLTAGE ACCURACY ±2.0%
RATED POWER
1W
OUTPUT
RIPPLE & NOISE Note.2 75mVp-p
LINE REGULATION Note.3 1.2% for 1% input variation
LOAD REGULATION Note.4 ±8%
SWITCHING FREQUENCY (Typ.) 100KHz
PROTECTION SHORT CIRCUIT
COOLING
Standard model: 0.5 second max. Optional models (SC-suffix): Continuous
Free-air convection
WORKING TEMP.
CASE TEMPERATURE
Standard model: -40 ~ +90℃ (Refer to "Derating Curve") ; Optional models (SC-suffix): -40 ~ +105℃
+100℃ max.
WORKING HUMIDITY 20% ~ 90% RH non-condensing
ENVIRONMENT _{STORAGE TEMP., HUMIDITY -55 ~ +125℃, 10 ~ 95% RH non-condensing}
TEMP. COEFFICIENT
0.03% / ℃ (0 ~ 85℃)
SOLDERING TEMPERATURE 1.5mm from case of 1 ~ 10sec./240℃ max.
VIBRATION
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
WITHSTAND VOLTAGE I/P-O/P:1.5KVDC
ISOLATION RESISTANCE _{I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH}
ISOLATION CAPACITANCE (Typ.) _80pF
Parameter
Standard
Test Level / Note( Note.6)
EMC EMISSION
Conducted
EN55032(CISPR32)
N/A
SAFETY &
EMC
( Note.5)
Radiated
Parameter
ESD
EN55032(CISPR32)
Standard
EN61000-4-2
Class B
Test Level / Note
Level 3, ±8KV air ; Level 2, ±4KV contact
Radiated Susceptibility
EN61000-4-3
Level 2, 3V/m
EMC IMMUNITY
EFT/Burest
Surge
EN61000-4-4
EN61000-4-5
Level 1, 0.5KV at power
Level 2, 0.5KV Line-Line
Conducted
EN61000-4-6
Level 2, 3V(e.m.f.)
Magnetic Field
EN61000-4-8
Level 1, 1A/m
MTBF
880Khrs min. MIL-HDBK-217F(25℃)
OTHERS
NOTE
DIMENSION (L*W*H)
12.9*10.9*7.1mm (0.50*0.43*0.28 inch)
CASE MATERIAL
Non-Conductive black plastic (UL 94V-0 rated)
PACKING
1.1g
1.All parameters are specified at normal input(L:5Vdc, M:12Vdc, N:24Vdc), rated load, 25℃ 70% RH ambient.
2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1μf & 47μf capacitor.
3.Line regulation is measured from low line to high line at rated load.
4.Load regulation is measured from 10% to 100% rated load.
5.The final equipment must be re-confirm that it still meet EMC directives. For guidance on how to perform these EMC tests, please
refer to “EMI testing of component power supplies.”(as available on http://www.meanwell.com)
6.An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5.
The filter capacitor Power Mate suggest: 220uF/100V.
File Name:SBTN01-SPEC 2017-02-24