EPS-65S Datasheet, PDF (2/4 Pages) Mean Well Enterprises Co., Ltd. – 65W Single Output Switching Power Supply

65W Single Output Switching Power Supply _{EPS-65S series}
SPECIFICATION
ORDER NO.
EPS-65S-3.3 EPS-65S-5 EPS-65S-7.5 EPS-65S-12 EPS-65S-15
DC VOLTAGE
3.3V
5V
7.5V
12V
15V
RATED CURRENT
10A
10A
8A
5.42A
4.34A
CURRENT RANGE
0 ~ 11A
0 ~ 11A
0 ~ 8.8A
0 ~ 5.96A
0 ~ 4.77A
RATED POWER
33W
50W
60W
65W
65.1W
OUTPUT PEAK LOAD(10sec.) Note.2 36.3W
RIPPLE & NOISE (max.) Note.3 80mVp-p
55W
80mVp-p
66W
80mVp-p
71.5W
120mVp-p
71.6W
150mVp-p
VOLTAGE ADJ.RANGE
2.9~3.6V
VOLTAGE TOLERANCE Note.4 ±2.0%
LINE REGULATION
±0.5%
LOAD REGULATION
±2.0%
4.7~5.5V
±2.0%
±0.5%
±2.0%
7.12~8.3V
±2.0%
±0.5%
±2.0%
11.4~13.2V
±2.0%
±0.5%
±2.0%
13.5~16.5V
±1.0%
±0.5%
±1.0%
SETUP, RISE TIME
500ms, 30ms / 230VAC 500ms, 30ms / 115VAC at full load
HOLD UP TIME (Typ.)
30ms / 230VAC 12ms / 115VAC at full load
VOLTAGE RANGE Note.5 80 ~ 264VAC
FREQUENCY RANGE
47 ~ 63Hz
INPUT EFFICIENCY (Typ.)
80%
84%
85%
88%
89%
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT(max.)
1.5A / 115VAC 1A / 230VAC
СOLD STAR 30A/115VAC 50A/230VAC
0.25mA/264VAC
OVERLOAD
115 ~ 150% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
PROTECTION
OVER VOLTAGE
3.8~4.46V
5.75~6.75V 8.62~11.3V 13.8~16.2V
Protection type : Shut down o/p voltage, re-power on to recover
17.25~20.25V
WORKING TEMP.
-30 ~ +70℃ (Refer to "Derating Curve")
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
20% ~ 90% RH non-condensing
-40 ~ +85℃, 10 ~ 95% RH
±0.03% / ℃ (0 ~ 50℃)
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY STANDARDS
SAFETY & ^{ISOLATION LEVEL}
EMC
WITHSTAND VOLTAGE
(Note. 6) _{ISOLATION RESISTANCE}
UL60950-1, TUV EN60950-1 approved
Primary-Secondary: 2xMOPP
I/P-O/P: 3KVAC
I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION
Compliance to EN55022(CISPR22) Class B, EN61000-3-2,3
EMC IMMUNITY
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, Heavy industry Level criteria A
OTHERS
MTBF
DIMENSION
PACKING
959.1Khrs min. MIL-HDBK-217(25℃)
76.2*50.8*24mm or 3" * 2" *0.945" inch (L*W*H)
0.11Kg; 120pcs/14.2Kg/0.97CUFT
EPS-65S-24
24V
2.71A
0 ~ 2.98A
65W
71.5W
240mVp-p
22.8~27.6V
±1.0%
±0.5%
±1.0%
90%
27.6~32.4V
EPS-65S-48
48V
1.36A
0 ~ 1.49A
65.3W
71.5W
300mVp-p
45.6~52.8V
±1.0%
±0.5%
±1.0%
91%
55.2~64.8V
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
NOTE
2. 33% Duty cycle maximum within every 30 seconds. Average output power should not exceed the rated power.
3. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
4. Tolerance : includes set up tolerance, line regulation and load regulation.
5. Derating may be needed under low input voltages. Please check the derating curve for more details.
6. The ambient temperature derating of 5℃/1000m is needed for operating altitude greater than 2000m (6500ft).
7. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it
still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power.
(as available on http://www.meanwell.com)
File Name:EPS-65S-SPEC 2015-12-10