DAP-04 Datasheet, PDF (2/7 Pages) Mean Well Enterprises Co., Ltd. – DALI-PWM Signal Converter

DALI-PWM Signal Converter
DAP-04 series
SPECIFICATION
MODEL
DAP-04
ORDER NAME
DAP-04
NUMBER OF OUTPUT CHANNELS 4
DAP-04-S01
OUTPUT
OUTPUT SIGNAL
OUTPUT PWM LOGIC
DIMMING RANGE
PWM, 1KHz (Typ.)
Active high or active low selectable by jumper ; Factory setting is active high
1 ~ 100%
VOLTAGE RANGE
90 ~ 305VAC 127 ~ 431VDC [DC input operation possible by connecting AC/L(+), AC/N(-)]
FREQUENCY RANGE
47 ~ 63Hz
INPUT
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
0.1A
COLD START 15A(twidth=500μs measured at 50% Ipeak) at 230VAC
LEAKAGE CURRENT
<0.5mA / 240VAC
POWER CONSUMPTION (Typ.) 0.5W
INPUT SIGNAL
FUNCTION RELAY SWITCH
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT
STORAGE TEMP., HUMIDITY
VIBRATION
DALI or push dim
240VAC / 8A, ON / OFF control refer to DIM1
-30~ +60℃
20 ~ 90% RH non-condensing
-40 ~ +80℃, 10 ~ 95% RH
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY STANDARDS
EN61347-1, EN61347-2-11, EN61058-1 Clause 8/17/20/25 approved
DALI STANDARDS
SAFETY & WITHSTAND VOLTAGE
Comply with IEC62386-101, 102, 207
I/P-O/P:3.75KVAC
EMC
OTHERS
NOTE
ISOLATION RESISTANCE I/P-O/P:>100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION
Compliance to EN55015, EN61000-3-2,3
EMC IMMUNITY
Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547 light industry level (surge 2KV), criteria A
MTBF
246.9K hrs min. MIL-HDBK-217F (25℃)
DIMENSION
165*46*23mm (L*W*H)
PACKING
0.16Kg; 84pcs/14.4Kgs/1.14CUFT
1. Power consumption<0.5W is measured at 230VAC.
2. Refer to DAP-04-S01 technical note.
File Name:DAP-04-SPEC 2015-11-16