YP-350J-AA Datasheet, PDF (1/2 Pages) Mean Well Enterprises Co., Ltd. – 350WATX with 24V industrial PC Power Supply

350W ATX with 24V industrial PC Power Supply
YP-350J-AA
Features :
Universal AC input / Full range
Built-in active PFC function, PF>0.95
Protections: Short circuit / Overload / Over voltage
Power good and fail signal
FAN speed control function
Power ON-OFF switch with indicator
Forced air cooling by built-in DC fan
100% full load burn-in test
Approvals: UL / CUL / TUV / CB / FCC / CE
2 years warranty
SPECIFICATION
ORDER NO.
YP-350J-AA
SAFETY MODEL NO.
YP-350J
CHANNEL
CH1
CH2
CH3
CH4
CH5
CH6
STANDBY
DC VOLTAGE
3.3V
5V
12V
24V
-5V
-12V
5VSB
MINIMUM CURRENT
0.3A
0.1A
0A
0A
0A
0A
0A
RATED CURRENT
9A
15A
9A
5A
0.3A
0.8A
2.0A
MAXIMUM CURRENT
14A
21A
15A
5A
OUTPUT _{COMBINE LOAD}
135W max. For +5V and +3.3V output
210W max. For +5V, +3.3V and +12V output
0.3A
0.8A
2.0A
RATED POWER (max.)
350W continue load
RIPPLE & NOISE (max.) Note.2 50mVp-p
LINE REGULATION
1.0%
50mVp-p
1.0%
120mVp-p
1.0%
150mVp-p
1.0%
100mVp-p
2.0%
120mVp-p
2.0%
50mVp-p
1.0%
LOAD REGULATION Note.3 5.0%
5.0%
-2.0 ~ +8.0% -2.0 ~ +8.0%
5.0%
10%
5.0%
HOLD UP TIME
10ms min. at full load (Rated current)
INPUT
VOLTAGE RANGE
FREQUENCY RANGE
POWER FACTOR
EFFICIENCY (Typ.)
100 ~ 264VAC
47 ~ 63Hz
PF>0.95@230VAC
70%
PF>0.98@115VAC
AC CURRENT
INRUSH CURRENT (max.)
LEAKAGE CURRENT
OVERLOAD
8.0A / 115VAC 4.5A / 230VAC
40A / 115VAC 80A / 230VAC
3.5mA / 240VAC
105 ~ 180% rated output power
Protection type : Shut down o/p voltage, re-power on to recover
PROTECTION OVER VOLTAGE
110% ~ 130% of rated voltage for +3.3V, +5V and +12V
Protection type : Shut down o/p voltage, re-power on to recover
SHORT CIRCUIT
All output equipped with short circuit
Protection type : Shut down o/p voltage, re-power on to recover
POWER GOOD SIGNAL
FUNCTION _{POWER FAIL SIGNAL}
The TTL compatible signal out with 100ms to 500ms delay after power set up
The TTL compatible signal will go down at least 1ms before +5V below 4.75V
PS-ON INPUT SIGNAL
Power on: PS-ON = "Low" or "<0.8V" ; Power off: PS-ON = "Hi" or ">2V"
WORKING TEMP.
-10 ~ +40
WORKING HUMIDITY
20 ~ 90% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY -20 ~ +85 , 10 ~ 95% RH
TEMP. COEFFICIENT
0.05% / (0 ~ 50 )
VIBRATION
10 ~ 200Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY STANDARDS
UL60950-1, TUV EN60950-1 approved
SAFETY &
EMC
(Note 4)
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMI CONDUCTION & RADIATION
HARMONIC CURRENT
I/P-O/P:1.5KVAC
I/P-O/P: 50M Ohms / 500VDC / 25 / 70% RH
Compliance to EN55022 (CISPR22) class B, FCC part 15 Class B
Compliance to EN61000-3-2,-3
EMS IMMUNITY
Compliance to EN61000-4-2,3,4, 5,6,8,11, light industry level, criteria A
MTBF
100K hrs min.
OTHERS
CONNECTOR
COOLING
DIMENSION
PACKING
ATX main power connector * 1ea; +12V power connector * 1ea; Auxiliary power connector * 1ea
Peripheral power connector * 5 ea; Floppy drive power connector * 2 ea
Forced air ventilation by 8cmx8 ball bearing DC fan
171*150*86mm (L*W*H)
1.6Kg ; 12pcs / 20Kg / CARTON
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Line regulation is measured from low line to high line at rated load.
4. Load regulation is measured from 20% to 100% max. Load.
5. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
File Name: YP-350J-AA-SPEC 2010-02-25