TS-1000_11 Datasheet, PDF (1/2 Pages) Mean Well Enterprises Co., Ltd. – 1000W True Sine Wave DC-AC Power Inverter

1000W True Sine Wave DC-AC Power Inverter
TS-1000 series
Features :
True sine wave output (THD<3%)
High surge power up to 2000W
High efficiency up to 92%
Power ON-OFF switch
Standby saving mode can be selected
Front panel indicator for operation status
Built-in fan ON-OFF control function
SPECIFICATION
Protections: Bat. low alarm / Bat. low shutdown / Over voltage / Over temp.
/ Output short / Input reverse polarity / Overload
Application : Home appliance, power tools, office and portable
equipment, vehicle and yacht ...etc.
3 years warranty
E13
MODEL
TS-1000-112
TS-1000-124
TS-1000-148
TS-1000-212
TS-1000-224
TS-1000-248
RATED POWER (Typ.)
1000W
MAXIMUM OUTPUT POWER (Typ.) 1150W for 180 sec. / 1500W for 10 sec. / surge power 2000W for 30 cycles
AC VOLTAGE
Factory setting set at 110VAC
100 / 110 / 115 / 120VAC selectable by setting button S.W
Factory setting set at 230VAC
200 / 220 / 230 / 240VAC selectable by setting button S.W
OUTPUT FREQUENCY
60 0.1Hz 50/60Hz selectable by setting button S.W
50 0.1%Hz 50/60Hz selectable by setting button S.W
WAVEFORM
True sine wave (THD<3%) at rated input voltage
AC REGULATION (Typ.)
3.0%
SAVING MODE (Typ.)
Default disabled. Load 5W will be changed to standby mode
FRONT PANEL INDICATOR Battery voltage level, output load level, saving mode, fault and operation status
BAT. VOLTAGE
12V
24V
48V
12V
24V
48V
INPUT
VOLTAGE RANGE (Typ.)Note.3 10.5 ~ 15VDC
21 ~ 30VDC
DC CURRENT (Typ.)
100A
50A
NO LOAD DISSIPATION
6W @ standby saving mode
42 ~ 60VDC
25A
10.5 ~ 15VDC
100A
21 ~ 30VDC
50A
42 ~ 60VDC
25A
OFF MODE CURRENT DRAW 1mA
EFFICIENCY (Typ.) Note.1 88%
89%
90%
90%
91%
92%
BATTERY TYPES
Open & sealed lead acid
FUSE
BATTERY _{BAT. LOW ALARM}
INPUT
PROTECTION
BAT. LOW SHUTDOWN
REVERSE POLARITY
40A*4
40A*2
11.3 4%
22.5 4%
10.5 4%
21 4%
By internal fuse open
20A*2
45 4%
42 4%
40A*4
11.3 4%
10.5 4%
40A*2
22.5 4%
21 4%
20A*2
45 4%
42 4%
OVER TEMPERATURE
90 5
70 5
Protection type : Shut down o/p voltage, re-power on to recover; by internal RTH3 detect on heatsink of power diode
OUTPUT ^{OUTPUT SHORT}
PROTECTION
OVER LOAD (Typ.)
Protection type : Shut down o/p voltage, re-power on to recover
105 ~ 115% load for 180 sec., 115% ~ 150% load for 10 sec.
Protection type : Shut down o/p voltage, re-power on to recover
GFCI PROCTECTION
Optional (Only type F)
WORKING TEMP.
Note.4 0 ~ +40 @ 100% load ; +60 @ 50% load
WORKING HUMIDITY
20% ~ 90% RH non-condensing
ENVIRONMENT
STORAGE TEMP., HUMIDITY -30 ~ +70 / -22 ~ +158^oF, 10 ~ 95% RH
None
VIBRATION
SAFETY STANDARDS
LVD
SAFETY & WITHSTAND VOLTAGE
EMC
ISOLATION RESISTANCE
EMC EMISSION
EMC IMMUNITY
MTBF
10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes
UL458 (only for "GFCI" receptacle-Type F ) None
None
EN60950-1
Bat I/P - AC O/P:3.0KVAC AC O/P - FG:1.5KVAC
AC O/P-FG, Bat I/P-FG:100M Ohms/500VDC / 25 / 70% RH
Compliance to FCC class A
Compliance to EN55022 class A, 72/ 245/ CEE, 95/ 54/ CE, E-Mark
None
Compliance to EN61000-4-2,3,8
66.9K hrs min. MIL-HDBK-217F (25^oC)
OTHERS
NOTE
DIMENSION
345*184*70mm (L*W*H)
PACKING
4.3Kg; 2pcs/9.6Kg/1.16CUFT
COOLING
Loading controlled cooling fan for GFCI receptacle-type F ; Thermostatically controlled cooling fan for others.
1.Efficiency is tested by 750W, linear load at 13V, 26V, 52V input voltage.
2.All parameters not specified above are measured at rated load, 25 of ambient temperature.
3.Output derating capacity referenced by curve 1.
4.Output derating capacity referenced by curve 2.
File Name:TS-1000-SPEC 2011-05-24