SPV-600 Datasheet, PDF (1/3 Pages) Mean Well Enterprises Co., Ltd. – 600W Single Output with PFC Function

600W Single Output with PFC Function
SPV-600 series
Features :
Universal AC input / Full range
Built-in active PFC function
Protections: Short circuit / Overload / Over voltage / Over temperature
Forced air cooling by built-in DC fan
Output voltage programmable from 20~110% by 1~5.5VDC external
control signal
With DC OK Signal output
Built-in remote ON-OFF control
Fixed switching frequency at PFC:88KHz PWM:100KHz
3 years warranty
SPECIFICATION
MODEL
SPV-600-12
SPV-600-24
SPV-600-48
DC VOLTAGE
12V
24V
48V
RATED CURRENT
50A
25A
12.5A
CURRENT RANGE
0 ~ 50A
0 ~ 25A
0 ~ 12.5A
RATED POWER
600W
600W
600W
RIPPLE & NOISE (max.) Note.2 240mVp-p
240mVp-p
300mVp-p
OUTPUT VOLTAGE ADJ. RANGE
10 ~ 13.2V
VOLTAGE TOLERANCE Note.3 1.0%
20 ~ 26.4V
1.0%
41 ~ 56V
1.0%
LINE REGULATION
0.5%
0.5%
0.5%
LOAD REGULATION
0.5%
0.5%
0.5%
SETUP, RISE TIME
1500ms, 50ms at full load
HOLD UP TIME (Typ.)
20ms at full load
VOLTAGE RANGE Note.4 88 ~ 264VAC 124 ~ 370VDC
FREQUENCY RANGE
47 ~ 63Hz
POWER FACTOR (Typ.)
0.95/230VAC 0.99/115VAC at full load
INPUT EFFICIENCY(Typ.)
84%
86%
87%
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
6.8A/115VAC
20A/115VAC
3.4A/230VAC
40A/230VAC
LEAKAGE CURRENT
<1.3mA/240VAC
OVERLOAD
105 ~ 135% rated output power
Protection type : Constant current limiting, recovers automatically after fault condition is removed
OVER VOLTAGE
PROTECTION
OVER TEMPERATURE
13.8 ~ 16.2V
27.6 ~ 32.4V
57.6 ~ 67.2V
Protection type : Shut down o/p voltage, re-power on to recover
85 (TSW1) detect on heatsink of power transistor; 80 (TSW51) detect on heatsink of power diode
Protection type : Shut down o/p voltage, re-power on to recover
REMOTE CONTROL
FUNCTION POK SIGNAL
OUTPUT VOLTAGE TRIM
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
RC+/RC-: Short = power on ; Open = power off
PSU turn on: 3.3V ~ 5.6V PSU turn off: 0V ~ 1V
2.4 ~ 13.2V
4.8 ~ 26.4V
-20 ~ +60 (Refer to output load derating curve)
20 ~ 90% RH non-condensing
-40 ~ +85 , 10 ~ 95% RH
0.03%/ (0 ~ 50 )
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
Design refer to UL60950-1, TUV EN60950-1
9.6 ~ 52.8V
SAFETY
OTHERS
NOTE
WITHSTAND VOLTAGE
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH
MTBF
116.4K hrs min. MIL-HDBK-217F (25 )
DIMENSION
170*120*93mm (L*W*H)
PACKING
1.9Kg; 8pcs/15.5Kg/1.06CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Derating may be needed under low input voltages. Please check the derating curve for more details.
File Name:SPV-600-SPEC 2009-12-21