SPV-150-12 Datasheet, PDF (1/3 Pages) Mean Well Enterprises Co., Ltd. – 150W Single Output with PFC Function

150W Single Output with PFC Function
SPV-150 series
Features :
Universal AC input / Full range
Built-in active PFC function, PF>0.95
Protections: Short circuit / Overload / Over voltage / Over temperature
Fixed switching frequency at 100KHz
Output voltage programmable from 20~110% by 1~5.5VDC external
control signal
3 years warranty
SPECIFICATION
MODEL
SPV-150-12
SPV-150-24
SPV-150-48
OUTPUT
DC VOLTAGE
12V
24V
RATED CURRENT
12.5A
6.25A
CURRENT RANGE
0 ~ 12.5A
0 ~ 6.25A
RATED POWER
150W
150W
RIPPLE & NOISE (max.) Note.2 150mVp-p
150mVp-p
VOLTAGE ADJ. RANGE
10 ~ 13.2V
20 ~ 26.4V
VOLTAGE TOLERANCE Note.3 1.0%
1.0%
LINE REGULATION
0.3%
0.2%
LOAD REGULATION
0.5%
0.5%
SETUP, RISE TIME
800ms, 50ms/230VAC 2500ms, 50ms/115VAC at full load
HOLD UP TIME (Typ.)
16ms/230VAC 16ms/115VAC at full load
48V
3.125A
0 ~ 3.125A
150W
240mVp-p
41 ~ 52.8V
1.0%
0.2%
0.5%
VOLTAGE RANGE Note.5 88 ~ 264VAC 124 ~ 370VDC
FREQUENCY RANGE
47 ~ 63Hz
POWER FACTOR (Typ.)
PF>0.94/230VAC PF>0.98/115VAC at full load
INPUT EFFICIENCY (Typ.)
82%
83%
83%
AC CURRENT (Typ.)
2.5A/115VAC 1.25A/230VAC
INRUSH CURRENT (Typ.) 20A/115VAC 40A/230VAC
LEAKAGE CURRENT
<1mA / 240VAC
OVERLOAD
105 ~ 150% rated output power
Protection type : Constant current limiting, recovers automatically after fault condition is removed
PROTECTION OVER VOLTAGE
13.8 ~ 16.2V
27.6 ~ 32.4V
Protection type : Shut down o/p voltage, re-power on to recover
57.6 ~ 67.2V
OVER TEMPERATURE
80 5 (TSW1 : detect on heatsink of power transistor)
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
REMOTE CONTROL
FUNCTION
OUTPUT VOLTAGE TRIM
4 ~ 10VDC power off, <0 ~ 0.8VDC power on
2.4 ~ 13.2V
4.8 ~ 26.4V
9.6 ~ 52.8V
WORKING TEMP.
-20 ~ +65 (Refer to output load derating curve)
WORKING HUMIDITY
20 ~ 90% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85 , 10 ~ 95% RH
TEMP. COEFFICIENT
0.03%/ (0 ~ 50
VIBRATION
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY STANDARDS
UL60950-1, TUV EN60950-1 approved
WITHSTAND VOLTAGE
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
SAFETY
EMC
(Note 4)
ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH
EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B
HARMONIC CURRENT
Compliance to EN61000-3-2,-3
EMS IMMUNITY
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A
MTBF
207K hrs min. MIL-HDBK-217F (25 )
OTHERS DIMENSION
PACKING
215*115*50mm (L*W*H)
1.1Kg; 12pcs/14Kg/0.92CUFT
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Mean Well reserves the right to adjust this spec when deemed appropriate.
5. Derating may be needed under low input voltages. Please check the derating curve for more details.
File Name:SPV-150-SPEC 2009-09-21