SPU03_12 Datasheet, PDF (1/1 Pages) Mean Well Enterprises Co., Ltd. – 3W DC-DC Unregulated Single Output Converter

3W DC-DC Unregulated Single Output Converter
SPU03 series
Features :
3000VDC I/O isolation
Internal SMD technology
Built-in EMI filter
Protection: Short circuit
Cooling by free air convection
Non-conductive plastic case
Single in line package
100% full load burn-in test
Low cost / High reliability
2 years warranty
SPECIFICATION
ORDER NO.
SPU03L-05 SPU03M-05 SPU03N-05 SPU03L-12 SPU03M-12 SPU03N-12 SPU03L-15 SPU03M-15 SPU03N-15
DC OUTPUT VOLTAGE
5V
12V
15V
CURRENT RANGE
EFFICIENCY (Typ.)
60 ~ 600mA
25 ~ 250mA
20 ~ 200mA
82%
83%
83%
85%
86%
86%
86%
86%
88%
OUTPUT
RATED POWER
3W
RIPPLE & NOISE (max.) Note.2 50mVp-p
LINE REGULATION Note.3 1.2% for 1% input variation
LOAD REGULATION Note.4 8.0%
VOLTAGE ACCURACY
2.0%
SWITCHING FREQUENCY 60KHz min.
INPUT
VOLTAGE RANGE
4.5 ~ 5.5V
NORMAL VOLTAGE
5V
Full load 740mA
INPUT CURRENT
No load 60mA
10.8 ~ 13.2V 21.6 ~ 26.4V 4.5 ~ 5.5V
12V
24V
5V
305mA
155mA
715mA
25mA
15mA
65mA
10.8 ~ 13.2V 21.6 ~ 26.4V 4.5 ~ 5.5V
12V
24V
5V
300mA
150mA
705mA
25mA
15mA
65mA
10.8 ~ 13.2V 21.6 ~ 26.4V
12V
24V
300mA
145mA
30mA
15mA
FILTER
Capacitor type
PROTECTION
OVERLOAD
PROTECTION
SHORT CIRCUIT
WORKING TEMP.
WORKING HUMIDITY
Fuse recommended
Momentary
Protection type : Broken
Momentary
Protection type : Broken
-40 ~ +90 (Refer to "Derating Curve")
20% ~ 90% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +105 , 10 ~ 95% RH
TEMP. COEFFICIENT
0.03% / (0 ~ 50 )
VIBRATION
10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes
WITHSTAND VOLTAGE
I/P-O/P:3KVDC
ISOLATION RESISTANCE I/P-O/P: 100M Ohms / 500VDC / 25 / 70% RH
SAFETY &
ISOLATION CAPACITANCE
80pF max.
EMC
EMI CONDUCTION & RADIATION Compliance to EN55022 Class B, FCC part 15 Class B
EMS IMMUNITY
Compliance to EN61000-4-2,3,4,5,6,8, light industry level, criteria A
MTBF
700khrs min. MIL-HDBK-217F(25 )
OTHERS DIMENSION
19.6*7.5*10.2mm or 0.77"*0.30"*0.40" inch (L*W*H)
WEIGHT
2.9g
Mechanical Specification
Pin Configuration
Derating Curve
Unit: mm (inch)
19.6 (0.77)
Pin No. Output
100
3.81 (0.15)
FRONT VIEW
1
+Vin
2
-Vin
0.5 (0.02)
5.08 (0.20)
5
-Vout
50
7
+Vout
7.5 (0.3) _{1 2 5 7}
BOTTOM VIEW
2.54 (0.10)
1.2 (0.05)
NOTE:Pin size tolerance 0.50 0.30mm 0.05mm
-40
0 25 50
NOTE
1.All parameters are specified at normal input, rated load, 25 70% RH ambient.
2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
3.Line regulation is measured from low line to high line at rated load.
4.Load regulation is measured from 20% to 100% rated load.
80 90 100 _{Ta ( )}
File Name: SPU03-SPEC 2012-02-22