SPU02_11 Datasheet, PDF (1/1 Pages) Mean Well Enterprises Co., Ltd. – 2W DC-DC Unregulated Single Output Converter

2W DC-DC Unregulated Single Output Converter
SPU02 series
Features :
3000VDC I/O isolation
Internal SMD technology
Built-in EMI filter
Protection: Short circuit
Cooling by free air convection
Non-conductive plastic case
Single in line package
100% full load burn-in test
Low cost / High reliability
2 years warranty
SPECIFICATION
ORDER NO.
SPU02L-05 SPU02M-05 SPU02N-05 SPU02L-12 SPU02M-12 SPU02N-12 SPU02L-15 SPU02M-15 SPU02N-15
DC OUTPUT VOLTAGE
5V
12V
15V
CURRENT RANGE
80 ~ 400mA
33 ~ 167mA
27 ~ 133mA
EFFICIENCY (Typ.)
77%
79%
77%
80%
81%
80%
81%
83%
82%
RATED POWER
2W
OUTPUT RIPPLE & NOISE (max.) Note.2 100mVp-p
LINE REGULATION Note.3 1.2% for 1% input variation
LOAD REGULATION Note.4 8.0%
VOLTAGE ACCURACY
2.0%
SWITCHING FREQUENCY 100KHz min.
VOLTAGE RANGE
NORMAL VOLTAGE
4.5 ~ 5.5V 10.8 ~ 13.2V 21.6 ~ 26.4V 4.5 ~ 5.5V 10.8 ~ 13.2V 21.6 ~ 26.4V 4.5 ~ 5.5V 10.8 ~ 13.2V 21.6 ~ 26.4V
5V
12V
24V
5V
12V
24V
5V
12V
24V
INPUT
Full load 520mA
INPUT CURRENT
No load 60mA
214mA
20mA
107mA
15mA
520mA
60mA
214mA
20mA
107mA
15mA
520mA
60mA
214mA
20mA
107mA
15mA
FILTER
Capacitor type
PROTECTION
OVERLOAD
PROTECTION
SHORT CIRCUIT
Fuse recommended
Momentary
Protection type : Broken
Momentary
Protection type : Broken
WORKING TEMP.
-40 ~ +71 (Refer to output load derating curve)
WORKING HUMIDITY
20% ~ 90% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY ^{-40 ~ +105 , 10 ~ 95% RH}
TEMP. COEFFICIENT
0.03% / (0 ~ 50 )
VIBRATION
10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes
WITHSTAND VOLTAGE
I/P-O/P:3KVDC
ISOLATION RESISTANCE I/P-O/P: 100M Ohms / 500VDC / 25 / 70% RH
SAFETY &
ISOLATION CAPACITANCE
80pF max.
EMC
EMI CONDUCTION & RADIATION Compliance to EN55022 Class B, FCC part 15 Class B
EMS IMMUNITY
Compliance to EN61000-4-2,3,4,5,6,8, light industry level, criteria A
MTBF
OTHERS DIMENSION
700khrs min. MIL-HDBK-217F(25 )
19.6*7.1*10.2mm or 0.77"*0.28"*0.40" inch (L*W*H)
WEIGHT
2.3g
Mechanical Specification
Pin Configuration
Derating Curve
Unit: mm (inch)
19.6 (0.77)
Pin No. Output
100
3.81 (0.15)
FRONT VIEW
1
+Vin
80
2
-Vin
0.5 (0.02)
5.08 (0.20)
5
-Vout
7
+Vout
7.1 (0.28) _{1 2}
57
1.2 (0.05)
BOTTOM VIEW
-40
0 25 50 60 71
100 _{Ta ( )}
NOTE
1.All parameters are specified at normal input, rated load, 25 70% RH ambient.
2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
3.Line regulation is measured from low line to high line at rated load.
4.Load regulation is measured from 20% to 100% rated load.
File Name: SPU02-SPEC 2011-03-14