SPB03_11 Datasheet, PDF (1/1 Pages) Mean Well Enterprises Co., Ltd. – 3W DC-DC Regulated Single Output Converter

3W DC-DC Regulated Single Output Converter
SPB03 series
Features :
2:1 wide input range
1000VDC I/O isolation
Built-in remote ON/OFF control
Built-in EMI filter
Protections: Short circuit / Overload
Cooling by free air convection
Single in line package
100% full load burn-in test
Low cost / High reliability
Modified models available: output 3.3V/9V
2 years warranty
SPECIFICATION
ORDER NO.
SPB03E-05 SPB03A-05 SPB03B-05 SPB03C-05 SPB03E-12 SPB03A-12 SPB03B-12 SPB03C-12 SPB03E-15 SPB03A-15 SPB03B-15 SPB03C-15
DC VOLTAGE
5V
12V
15V
CURRENT RANGE
60 ~ 600mA
25 ~ 250mA
20 ~ 200mA
RATED POWER
3W
OUTPUT ^{RIPPLE & NOISE (max.) Note.2 50mVp-p}
LINE REGULATION Note.3 0.5%
60mVp-p
60mVp-p
LOAD REGULATION Note.4 0.5%
VOLTAGE ACCURACY
2.0%
SWITCHING FREQUENCY 100KHz min.
VOLTAGE RANGE
E: 4.5 ~ 9VDC A: 9 ~ 18VDC B: 18 ~ 36VDC C: 36 ~ 72VDC
EFFICIENCY (Typ.)
74% 73% 77% 78% 76% 80% 80% 79% 75% 80% 80% 82%
INPUT DC CURRENT
Full load E: 810mA A: 340mA B: 165mA C: 85mA
No load E: 110mA A: 40mA B: 20mA C: 10mA
FILTER
Pi network
PROTECTION
Fuse recommended
PROTECTION
(Note. 5)
ENVIRONMENT
OVERLOAD
150 ~ 250% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
SHORT CIRCUIT
All output equipped with short circuit
Protection type : Hiccup mode, recovers automatically after fault condition is removed
WORKING TEMP.
-40 ~ +85 (Refer to output load derating curve)
WORKING HUMIDITY
20% ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY -40 ~ +105 , 10 ~ 95% RH
TEMP. COEFFICIENT
0.05% / (0 ~ 50 )
VIBRATION
10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes
SAFETY
OTHERS
WITHSTAND VOLTAGE
I/P-O/P:1KVDC
ISOLATION RESISTANCE I/P-O/P: 100M Ohms / 500VDC / 25 / 70% RH
ISOLATION CAPACITANCE 80pF max.
EMI CONDUCTION & RADIATION Compliance to EN55022 Class B, FCC part 15 Class B
EMS IMMUNITY
Compliance to EN61000-4-2,3,4,5,6,8 light industry level, criteria A
REMOTE CONTROL
Power ON : R.C. ~ +Vin < 1VDC or open ; Power OFF : R.C. ~ +Vin > 4VDC or short
MTBF
600Khrs min. MIL-HDBK-217F(25 )
DIMENSION
21.8*9.2*11.1mm or 0.86"*0.36"*0.44" inch (L*W*H)
WEIGHT
4.8g
Mechanical Specification
21.8(0.86)
Unit:mm(inch)
Pin Configuration
Derating Curve
FRONT VIEW
0.5
(0.02)
123 5678
0.5 0.05(0.02)
5.08
3.81 0.5(0.15)
2.54(0.1)
(0.2)
17.78(0.7)
3.2(0.13)
BOTTOM VIEW
2.01(0.08)
Pin No.
1
2
3
5
6
7
8
Output
-Vin
+ Vin
R.C.
N.C.
+Vout
-Vout
N.C.
100
50
-40
0 25 50 70 85
100
Ta ( )
NOTE
1.All parameters are specified at normal input, rated load, 25 70% RH ambient.
2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
3.Line regulation is measured from low line to high line at rated load.
4.Load regulation is measured from 10% to 100% rated load.
5.Please prevent the converter from operating in overload or short circuit condition for more than 30 seconds.
File Name:SPB03-SPEC 2011-03-08