SMU01L-05 Datasheet, PDF (1/1 Pages) Mean Well Enterprises Co., Ltd. – 1W DC-DC Unregulated Single Output Converter

1W DC-DC Unregulated Single Output Converter
SMU01 series
SELECTION GUIDE
ORDER NO.
DC OUTPUT VOLTAGE
OUTPUT CURRENT RANGE
EFFICIENCY(Typ.)
SMU01L-05
5V
0 ~ 200mA
77%
SMU01M-05
79%
Features :
1500VDC I/O isolation
3000VDC I/O isolation(optional)
Operating temperature range of -40 ~ +85
Internal SMD technology
Built-in EMI filter
Cooling by free air convection
Non-conductive plastic case
SIP packge
Industry standard pinout
100% burn-in test
Low cost / High reliability
2 years warranty
without derating
SMU01N-05
78%
SMU01L-09
9V
0 ~ 110mA
77%
SMU01M-09
SMU01N-09
79%
76%
ORDER NO.
SMU01L-12
SMU01M-12
SMU01N-12
SMU01L-15
SMU01M-15
SMU01N-15
DC OUTPUT VOLTAGE
12V
15V
OUTPUT CURRENT RANGE 0 ~ 84mA
0 ~ 67mA
EFFICIENCY(Typ.)
78%
80%
77%
78%
80%
77%
SPECIFICATION
RATED POWER
1W
RIPPLE & NOISE (max.) Note.2 100mVp-p
LINE REGULATION Note.3 1.2% for 1% input variation
OUTPUT
LOAD REGULATION Note.4 8.0%
VOLTAGE ACCURACY
2.0%
SWITCHING FREQUENCY(Typ.) 100KHz
VOLTAGE RANGE
4.5 ~ 5.5V
10.8 ~ 13.2V
21.6 ~ 26.4V
4.5 ~ 5.5V
10.8 ~ 13.2V
21.6 ~ 26.4V
NORMAL VOLTAGE
5V
12V
24V
5V
12V
24V
INPUT
Full load 265mA
INPUT CURRENT
No load 32mA
110mA
15mA
57mA
11mA
265mA
32mA
110mA
15mA
57mA
11mA
PROTECTION (FUSE RECOMMENDED) 500mA
250mA
150mA
500mA
250mA
150mA
FILTER
Capacitor type
OVERLOAD
PROTECTION
SHORT CIRCUIT
Momentary
Protection type : Broken
Momentary
Protection type : Broken
WORKING TEMP.
-40 ~ +90 (Refer to output load derating curve)
WORKING HUMIDITY
20% ~ 90% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY -55 ~ +125 , 10 ~ 95% RH
TEMP. COEFFICIENT
0.05% / (0 ~ 50 )
VIBRATION
WITHSTAND VOLTAGE
10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes
I/P-O/P:1.5KVDC
SAFETY &
EMC
ISOLATION RESISTANCE
ISOLATION CAPACITANCE
EMI RADIATION
EMS IMMUNITY
I/P-O/P: 100M Ohms / 500VDC / 25 / 70% RH
80pF max.
Compliance to EN55022 Class B, FCC part 15 Class B
Compliance to EN61000-4-2,3,4,5,6,8 light industry level, criteria A
MTBF
700khrs min. MIL-HDBK-217F(25 )
OTHERS DIMENSION (L*W*H)
11.6*6.1*10.14mm or 0.46"*0.24"*0.40" inch for 5V,12V input ; 11.6*7.4*10.14mm or 0.46"*0.29"*0.40" inch for 24V input
WEIGHT
1.3g
Mechanical Specification
Unit: mm (inch)
Pin Configuration
Derating Curve
11.6 (0.46)
FRONT
Pin No. Output
100
1.2 (0.05)
1
-Vin
1234
2
+Vin
VIEW
3.81 (0.15)
BOTT ON VIEW
3
-Vout
50
4
+Vout
2.54 (0.10)
-40
0 20 40 60 85 90 100
Ta ( )
NOTE
1.All parameters are specified at normal input, rated load, 25 70% RH ambient.
2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
3.Line regulation is measured from low line to high line at rated load.
4.Load regulation is measured from 20% to 100% rated load.
File Name: SMU01-SPEC 2009-10-12