SE-200 Datasheet, PDF (1/2 Pages) Mean Well Enterprises Co., Ltd. – 200W Single Output Switching Power Supply

200W Single Output Switching Power Supply
SE-200 series
Features :
AC input range selectable by switch
Protections: Short circuit / Overload / Over voltage/
Over temperature
Cooling by free air convection
Withstand 300vac surge input for 5 second
Built-in constant current limiting circuit
100% full load burn-in test
LED indicator for power on
Fixed switching frequency at 90KHz
Low cost,high reliability
2 years warranty
SPECIFICATION
MODEL
SE-200-3.3 SE-200-5 SE-200-7.5 SE-200-12 SE-200-15 SE-200-24 SE-200-27 SE-200-36 SE-200-48
OUTPUT
DC VOLTAGE
3.3V
RATED CURRENT
40A
CURRENT RANGE
0 ~ 40A
RATED POWER
132W
RIPPLE & NOISE (max.) Note.2 150mVp-p
VOLTAGE ADJ. RANGE
2.97 ~ 3.7V
VOLTAGE TOLERANCE Note.3 2.0%
LINE REGULATION
0.5%
LOAD REGULATION
1.5%
5V
40A
0 ~ 40A
200W
150mVp-p
4.5 ~ 5.6V
2.0%
0.5%
1.0%
7.5V
27A
0 ~ 27A
202.5W
150mVp-p
6 ~ 9V
2.0%
0.5%
1.0%
12V
17A
0 ~ 17A
204W
150mVp-p
10 ~ 13.5V
1.0%
0.5%
0.5%
15V
14A
0 ~ 14A
210W
150mVp-p
13.5 ~ 18V
1.0%
0.5%
0.5%
24V
8.8A
0 ~ 8.8A
211.2W
150mVp-p
20 ~ 26.4V
1.0%
0.5%
0.5%
27V
7.8A
0 ~ 7.8A
210.6W
200mVp-p
26 ~ 32V
1.0%
0.5%
0.5%
36V
5.9A
0 ~ 5.9A
212.4W
240mVp-p
32 ~ 40V
1.0%
0.5%
0.5%
48V
4.4A
0 ~ 4.4A
211.2W
240mVp-p
41 ~ 56V
1.0%
0.5%
0.5%
SETUP, RISE TIME
1000ms, 50ms/230VAC 1000ms,50ms/115VAC at full load
HOLD UP TIME
VOLTAGE RANGE
20ms/230VAC 16ms/115VAC at full load
90 ~ 132VAC / 180 ~ 264VAC by switch 254 ~ 370VDC
FREQUENCY RANGE
47 ~ 63Hz
INPUT
EFFICIENCY (Typ.)
AC CURRENT
75%
79%
82%
85%
85%
87%
88%
89%
89%
4.5A/115VAC 2.5A/230VAC
INRUSH CURRENT (max.) 40A/115VAC 55A/230VAC
LEAKAGE CURRENT
<3.5mA / 240VAC
OVER LOAD
PROTECTION OVER VOLTAGE
105 ~ 150% rated output power
Protection type : Constant current limiting, recovers automatically after fault condition is removed
3.8 ~ 4.9V 5.75 ~ 6.75V 9.4 ~ 10.9V 13.8 ~ 16.2V 18 ~ 21V 27.6 ~ 32.4V 33.7 ~ 39.2V 41.4 ~ 46.8V 57.6 ~ 67.2V
Protection type :Shut down O/P voltage, re-power on to recover
OVER TEMPERATURE
95 5 (3.3V);100 5 (5V); 90 5 (7.5V);85 5 (12~24V);80 5 (27~36V);75 5 (48V) (TSW1) Detect on case
Protection type : Shut down O/P voltage, recovers automatically after temperature goes down
WORKING TEMP.
-20 ~ +50 (Refer to output load derating curve)
WORKING HUMIDITY
20 ~ 90% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY -20 ~ +85 , 10 ~ 95% RH
TEMP. COEFFICIENT
0.03%/ (0 ~ 50
VIBRATION
10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY STANDARDS
UL60950-1 approved
WITHSTAND VOLTAGE
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
SAFETY &
EMC
ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC / 25 / 70% RH
EMI CONDUCTION & RADIATION Design refer to EN55022 (CISPR22) Class A
EMS IMMUNITY
Design refer to EN61000-4-2, 3, 4, 5, 6, 8,11, ENV50204, EN55024, light industry level, criteria A
MTBF
271.9K hrs min. MIL-HDBK-217F (25 )
OTHERS DIMENSION
215*115*50mm (L*W*H)
PACKING
0.93Kg; 12pcs/12Kg/0.92CUFT
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
File Name:SE-200-SPEC 2011-04-23