SD-200_1109 Datasheet, PDF (1/3 Pages) Mean Well Enterprises Co., Ltd. – 200W Single Output DC-DC Converter

200W Single Output DC-DC Converter
SD-200 series
Features :
2:1 wide input range
Protections: Short circuit / Overload / Over voltage / Over temperature
1500VAC I/O isolation
Cooling by free air convection
100% full load burn-in test
24V and 48V input voltage design refer to LVD
2 years warranty
SPECIFICATION
(for SD-200C-24 type only)
(for D type only)
MODEL
SD-200B
SD-200C
DC VOLTAGE
5V
12V
24V
48V
5V
12V
24V
48V
RATED CURRENT
34A
16.7A
8.4A
4.2A
40A
16.7A
8.4A
4.2A
CURRENT RANGE
0 ~ 34A
0 ~ 16.7A
0 ~ 8.4A
0 ~ 4.2A
0 ~ 40A
0 ~ 16.7A
0 ~ 8.4A
0 ~ 4.2A
RATED POWER
170W
200.4W
201.6W
201.6W
200W
200.4W
201.6W
201.6W
OUTPUT
RIPPLE & NOISE (max.) Note.2 100mVp-p
VOLTAGE ADJ. RANGE
4.5 ~ 5.5VDC
VOLTAGE TOLERANCE Note.3 2.0%
LINE REGULATION
0.5%
120mVp-p
11 ~ 16VDC
1.0%
0.5%
150mVp-p
23 ~ 30VDC
1.0%
0.5%
200mVp-p
43 ~ 53VDC
1.0%
0.5%
100mVp-p
4.5 ~ 5.5VDC
2.0%
0.5%
120mVp-p
11 ~ 16VDC
1.0%
0.5%
150mVp-p
23 ~ 30VDC
1.0%
0.5%
200mVp-p
43 ~ 53VDC
1.0%
0.5%
LOAD REGULATION
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
SETUP, RISE TIME
300ms, 50ms at full load
VOLTAGE RANGE
B:19 ~ 36VDC C:36 ~ 72VDC D:72 ~144VDC
INPUT
EFFICIENCY (Typ.)
DC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
79%
82%
85%
10.8A/24V 10.6A/24V 10.4A/24V
C:45A/48VDC D:45A/96VDC
86%
10.4A/24V
81%
5.4A/48V
84%
5.2A/48V
86%
6.7A/48V
86%
5A/48V
OVERLOAD
105 ~ 135% rated output power
Protection type : Shut down o/p voltage, re-power on to recover
PROTECTION OVER VOLTAGE
5.75 ~ 6.75V 16.8 ~ 20V 31.5 ~ 37.5V 53 ~ 65V
5.75 ~ 6.75V 16.8 ~ 20V
Protection type : Shut down o/p voltage, re-power on to recover
31.5 ~ 37.5V 53 ~ 65V
ENVIRONMENT
OVER TEMPERATURE
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
95 5 (100 5 for SD-200B-12 only) TSW1 detect on main power transistor
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
-20 ~ +60 (Refer to "Derating Curve")
20 ~ 90% RH non-condensing
-40 ~ +85 , 10 ~ 95% RH
0.03%/ (0 ~ 50
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY &
EMC
(Note 4)
SAFETY STANDARDS
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMC EMISSION
UL60950-1approved (for SD-200C-24 type only), IEC60950-1 CB approved by TUV (for D type only)
I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH
Compliance to EN55022 (CISPR22) Class B
OTHERS
NOTE
EMC IMMUNITY
Compliance to EN61000-4-2,3,4,6,8, light industry level, criteria A
MTBF
218.2K hrs min. MIL-HDBK-217F (25 )
DIMENSION
215*115*50mm (L*W*H)
PACKING
1.1Kg; 12pcs/14.4Kg/0.92CUFT
1. All parameters NOT specially mentioned are measured at 24,48,96VDC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”
(as available on http://www.meanwell.com)
File Name:SD-200-SPEC 2011-08-23