S-240 Datasheet, PDF (1/2 Pages) Astrodyne Corporation – 240W Single Output Switching Power Supply

240W Single Output Switching Power Supply
S-240 series
■ Features :
Auto switched 88 ~ 264VAC input
Built-in passive PFC choke
Protections: Short circuit / Overload / Over voltage / Over temperature
Forced air cooling by built-in DC fan
Built-in cooling Fan ON-OFF control
LED indicator for power on
Fixed switching frequency at 75KHz
2 years warranty
..
SPECIFICATION
MODEL
S-240-5
S-240-7.5
S-240-12
S-240-15
S-240-24
S-240-30
S-240-48
DC VOLTAGE
5V
7.5V
12V
15V
24V
30V
48V
RATED CURRENT
40A
30A
18A
15A
10A
8A
5A
CURRENT RANGE
0 ~ 40A
0 ~ 30A
0 ~ 18A
0 ~ 15A
0 ~ 10A
0 ~ 8A
0 ~ 5A
RATED POWER
200W
225W
216W
225W
240W
240W
240W
OUTPUT
RIPPLE & NOISE (max.) Note.2 150mVp-p
VOLTAGE ADJ. RANGE
4.5 ~ 5.8V
VOLTAGE TOLERANCE Note.3 ± 2.0%
LINE REGULATION
± 0.5%
LOAD REGULATION
± 1.0%
200mVp-p
6 ~ 9V
± 2.0%
± 0.5%
± 1.0%
150mVp-p
10 ~ 14V
± 1.0%
± 0.5%
± 0.5%
150mVp-p
12 ~ 18V
± 1.0%
± 0.5%
± 0.5%
180mVp-p
20 ~ 28V
± 1.0%
± 0.5%
± 0.5%
180mVp-p
27 ~ 33V
± 1.0%
± 0.5%
± 0.5%
240mVp-p
41 ~ 56V
± 1.0%
± 1.0%
± 1.0%
SETUP, RISE TIME
1000ms, 20ms at full load
HOLD UP TIME (Typ.)
36ms at full load
VOLTAGE RANGE
88 ~ 132VAC / 176 ~ 264VAC auto switch 248 ~ 370VDC
FREQUENCY RANGE
47 ~ 63Hz
INPUT
EFFICIENCY (Typ.)
78%
80%
82%
83%
84%
85%
87%
AC CURRENT (Typ.)
5A/115VAC 2.5A/230VAC
INRUSH CURRENT (Typ.) 15A/115VAC 30A/230VAC
LEAKAGE CURRENT
<2mA / 240VAC
OVERLOAD
PROTECTION
OVER VOLTAGE
105 ~ 135% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed.
6 ~ 7V
9.4 ~ 10.9V
14.4 ~ 16.8V 18.5 ~ 21.5V 31.2 ~ 36V
Protection type : Hiccup mode, recovers automatically after fault condition is removed.
34.5 ~ 40.5V 57.6 ~ 67.2V
FUNCTION FAN CONTROL, O.T.P.
RT1≧40℃ FAN ON, ≦35℃ FAN OFF, ≧70℃ output shutdown
WORKING TEMP.
-10 ~ +60℃ (Refer to output load derating curve)
WORKING HUMIDITY
20 ~ 90% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY -20 ~ +85℃, 10 ~ 95% RH
TEMP. COEFFICIENT
± 0.03%/℃ (0 ~ 50℃)
VIBRATION
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY STANDARDS
UL60950-1, TUV EN60950-1 approved (7.5V Design refer to TUV EN60950-1)
SAFETY &
EMC
(Note 4)
WITHSTAND VOLTAGE
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B
HARMONIC CURRENT
Compliance to EN61000-3-2,-3
EMS IMMUNITY
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, light industry level, criteria A
MTBF
179.3K hrs min. MIL-HDBK-217F (25℃)
OTHERS DIMENSION
190*93*65mm (L*W*H)
PACKING
1.2Kg; 12pcs/15.3Kg/0.79CUFT
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
File Name:S-240-SPEC 2007-10-25