S-210 Datasheet, PDF (1/2 Pages) Mean Well Enterprises Co., Ltd. – 210W Single Output Swithching Power Supply

210W Single Output Switching Power Supply
S-210 series
■ Features :
AC input range selectable by switch
Protections: Short circuit / Overload / Over voltage / Over temperature
100% full load burn-in test
Fixed switching frequency at 90KHz
Low cost
High reliability
2 years warranty
SPECIFICATION
MODEL
S-210-5
S-210-7.5 S-210-12
S-210-13.5 S-210-15
S-210-24
S-210-27
S-210-48
DC VOLTAGE
5V
7.5V
12V
13.5V
15V
24V
27V
48V
RATED CURRENT
40A
27A
17A
15A
14A
8.8A
7.8A
4.4A
CURRENT RANGE
0 ~ 40A
0 ~ 27A
0 ~ 17A
0 ~ 15A
0 ~ 14A
0 ~ 8.8A
0 ~ 7.8A
0 ~ 4.4A
RATED POWER
200W
202.5W
204W
202.5W
210W
211.2W
210.6W
211.2W
RIPPLE & NOISE (max.) Note.2 80mVp-p
100mVp-p 120mVp-p 120mVp-p 120mVp-p 200mVp-p 200mVp-p 200mVp-p
OUTPUT
VOLTAGE ADJ. RANGE
4.5 ~ 5.7V
VOLTAGE TOLERANCE Note.3 ± 2.0%
LINE REGULATION
± 0.5%
LOAD REGULATION
± 1.0%
6 ~ 9V
± 2.0%
± 0.5%
± 1.0%
10 ~ 13.2V
± 1.0%
± 0.5%
± 0.5%
12 ~ 15V
± 1.0%
± 0.5%
± 0.5%
13.5 ~ 18V
± 1.0%
± 0.5%
± 0.5%
20 ~ 26.4V
± 1.0%
± 0.5%
± 0.5%
26 ~ 29V
± 1.0%
± 0.5%
± 0.5%
45.6 ~ 52.8V
± 1.0%
± 0.5%
± 0.5%
SETUP, RISE TIME
1000ms, 20ms/230VAC 1000ms, 20ms/115VAC at full load
HOLD UP TIME (Typ.)
20ms/230VAC 20ms/115VAC at full load
VOLTAGE RANGE
88 ~ 132VAC / 176~264VAC by switch 248 ~ 370VDC
FREQUENCY RANGE
47 ~ 63Hz
INPUT
EFFICIENCY (Typ.)
79%
82%
83%
84%
85%
87%
87%
87%
AC CURRENT (Typ.)
4.2A/115VAC 2.5A/230VAC
INRUSH CURRENT (Typ.) 35A/115VAC 50A/230VAC
LEAKAGE CURRENT
<3.5mA / 240VAC
OVERLOAD
105 ~ 150% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
PROTECTION OVER VOLTAGE
5.75 ~ 6.75V 9.4 ~ 10.9V 13.8 ~ 16.2V 15.5 ~ 18.2V 18 ~ 21V
27.6 ~ 32.4V 31.05 ~ 36.45V 55.2 ~ 64.8V
Protection type : Hiccup mode, recovers automatically after fault condition is removed
OVER TEMPERATURE
RTH1≧85℃
Protection type : Hiccup mode, recovers automatically after fault condition is removed
WORKING TEMP.
-20 ~ +50℃ (Refer to output load derating curve)
WORKING HUMIDITY
20 ~ 90% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85℃, 10 ~ 95% RH
TEMP. COEFFICIENT
± 0.03%/℃ (0 ~ 50℃)
VIBRATION
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY STANDARDS
SAFETY & _{WITHSTAND VOLTAGE}
EMC
ISOLATION RESISTANCE
UL60950-1 approved
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
MTBF
244.7K hrs min. MIL-HDBK-217F (25℃)
OTHERS DIMENSION
215*115*50mm (L*W*H)
PACKING
0.95Kg; 12pcs/12.4Kg/0.92CUFT
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
File Name:S-210-SPEC 2007-10-25