S-15 Datasheet, PDF (1/2 Pages) Mean Well Enterprises Co., Ltd. – 15W Single Output Switching Power Supply

15W Single Output Switching Power Supply
S-15 series
Features :
AC input range selected by switch
Protections:Short circuit/Over load
Cooling by free air convection
100% full load burn-in
Fixed switching frequency at 37KHz
Lost cost
High reliability
1 year warranty
SPECIFICATION
MODEL
S-15-5
S-15-12
S-15-24
DC VOLTAGE
5V
12V
24V
RATED CURRENT
3A
1.3A
0.7A
CURRENT RANGE
0 ~ 3A
0 ~ 1.3A
0 ~ 0.7A
RATED POWER
15W
15.6W
16.8W
OUTPUT
RIPPLE & NOISE (max.) Note.2 50mVp-p
VOLTAGE ADJ. RANGE
4.75 ~ 5.5V
VOLTAGE TOLERANCE Note.3 2.0%
LINE REGULATION
0.5%
50mVp-p
10.8 ~ 13.2V
1.0%
0.5%
100mVp-p
21.6 ~ 26.4V
1.0%
0.5%
LOAD REGULATION
1.0%
0.5%
0.5%
SETUP, RISE, HOLD TIME 200ms, 100ms, 30ms at full load
VOLTAGE RANGE
85 ~ 132VAC / 170 ~ 264VAC selected by switch 240 ~ 370VDC
FREQUENCY RANGE
47 ~ 63Hz
INPUT
EFFICIENCY(Typ.)
65%
68%
72%
AC CURRENT
0.5A/115VAC 0.25A/230VAC
INRUSH CURRENT(max.) COLD START 15A/115VAC 30A/230VAC
LEAKAGE CURRENT
<0.5mA / 240VAC
PROTECTION OVER LOAD
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
SAFETY & WITHSTAND VOLTAGE
105 ~ 150% rated output power
Protection type : Fold back current limiting, recovers automatically after fault condition is removed
-10 ~ +60 (Refer to output load derating curve)
20 ~ 90% RH non-condensing
-20 ~ +85 , 10 ~ 95% RH non-condensing
0.02%/ (0 ~ 50 )
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
Design refer to UL1012
I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
EMC
ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMI CONDUCTION & RADIATION Design refer to FCC Part15 J Conduction Class B
OTHERS
MTBF
DIMENSION
PACKING
522.1K hrs min. MIL-HDBK-217F (25 )
99*97*36mm (L*W*H)
0.31Kg; 45pcs/15Kg/0.9CUFT
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
File Name:S-15-SPEC 2004-06-30