RSP-320 Datasheet, PDF (1/3 Pages) Mean Well Enterprises Co., Ltd. – 320W Single Output with PFC Function

320W Single Output with PFC Function
RSP-320 series
¡½ Features :
¡EUniversal AC input / Full range
¡EBuilt-in active PFC function, PF>0.95
¡EProtections: Short circuit / Overload / Over voltage / Over temperature
¡EForced air cooling by built-in DC Fan
¡E1U low profile 30mm
¡EOptional conformal coating (RSP-320-¡¼CC)
¡EBuilt-in fan speed control
¡ELED indicator for power on
¡E3 years warranty
SPECIFICATION
MODEL
RSP-320-2.5
RSP-320-3.3
RSP-320-4
RSP-320-5
RSP-320-7.5
RSP-320-12
DC VOLTAGE
2.5V
3.3V
4V
5V
7.5V
12V
RATED CURRENT
60A
60A
60A
60A
40A
26.7A
CURRENT RANGE
0 ~ 60A
0 ~ 60A
0 ~ 60A
0 ~ 60A
0 ~ 40A
0 ~ 26.7A
RATED POWER
150W
198W
240W
300W
300W
320.4W
OUTPUT
RIPPLE & NOISE (max.) Note.2 100mVp-p
100mVp-p
100mVp-p
150mVp-p
VOLTAGE ADJ. RANGE
2.35 ~ 2.85V
2.97 ~ 3.8V
3.7 ~ 4.3V
4.5 ~ 5.5V
VOLTAGE TOLERANCE Note.3 ¡Ó2.0%
¡Ó2.0%
¡Ó2.0%
¡Ó2.0%
LINE REGULATION
¡Ó0.5%
¡Ó0.5%
¡Ó0.5%
¡Ó0.5%
LOAD REGULATION
¡Ó1.5%
¡Ó1.5%
¡Ó1.0%
¡Ó1.0%
SETUP, RISE TIME
1500ms, 50ms/230VAC 3000ms, 50ms/115VAC at full load
150mVp-p
6 ~ 9V
¡Ó2.0%
¡Ó0.5%
¡Ó1.0%
150mVp-p
10 ~ 13.2V
¡Ó1.0%
¡Ó0.3%
¡Ó0.5%
HOLD UP TIME (Typ.)
8ms at full load 230VAC /115VAC
VOLTAGE RANGE Note.5 88 ~ 264VAC 124 ~ 370VDC
FREQUENCY RANGE
47 ~ 63Hz
POWER FACTOR (Typ.)
PF>0.95/230VAC PF>0.98/115VAC at full load
INPUT EFFICIENCY (Typ.)
79.5%
83%
84.5%
86%
88%
88%
AC CURRENT (Typ.)
2.7A/115VAC 1.5 A/230VAC
5A/115VAC 2.5 A/230VAC
INRUSH CURRENT (Typ.) 20A/115VAC 40A/230VAC
LEAKAGE CURRENT
<1mA / 240VAC
OVERLOAD
105 ~ 135% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
PROTECTION OVER VOLTAGE
2.88 ~ 3.38V
3.8 ~ 4.5V
4.5 ~ 5.3V
5.75 ~ 6.75V
Protection type : Shut down o/p voltage, re-power on to recover
9.4 ~ 10.9V
OVER TEMPERATURE
80¢J¡Ó5¢J (TSW1) detect on heatsink of power transistor
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
WORKING TEMP.
-30 ~ +70¢J (Refer to "Derating Curve")
WORKING HUMIDITY
20 ~ 90% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85¢J, 10 ~ 95% RH
TEMP. COEFFICIENT
¡Ó0.03%/¢J (0 ~ 50¢J)
VIBRATION
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
13.8 ~ 16.2V
85¢J¡Ó5¢J (TSW1)
SAFETY STANDARDS
SAFETY & ^{WITHSTAND VOLTAGE}
EMC
ISOLATION RESISTANCE
(Note 4) _{EMC EMISSION}
UL60950-1, TUV EN60950-1 approved
I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25¢J/ 70% RH
Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
EMC IMMUNITY
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A
MTBF
206.5K hrs min. MIL-HDBK-217F (25¢J)
OTHERS DIMENSION
PACKING
215*115*30mm (L*W*H)
0.9Kg; 15pcs/14.5Kg/0.81CUFT
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25¢J of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”
(as available on http://www.meanwell.com)
5. Derating may be needed under low input voltages. Please check the derating curve for more details.
File Name:RSP-320-SPEC 2012-08-21