RCP-1000 Datasheet, PDF (1/8 Pages) Mean Well Enterprises Co., Ltd. – 1000 ~ 3000W Front End Power System

1000 ~ 3000W Front End Power System
RCP series
SELECTION GUIDE
Features :
Universal AC input / Full range
Built-in 5V/0.3A auxiliary power
Built-in active PFC function, PF>0.96
Protections: Short circuit / Overload / Over voltage / Over temperature
Forced air cooling by built-in DC fan with fan speed control
Low profile:1U height
Active current sharing up to 3000W (3 units)in 19" rack, 3 racks max.
can be operated in parallel (up to 8 units) (Note.7)
Remote control for single unit
Built-in remote sense function
Output voltage trimming function
Hot-swap operation
Optional I²C serial data bus
AC OK & DC OK signal
Internal ORing diode
3 years warranty
Single Unit: RCP-1000- 12 - C
C: With I² C Interface
-: Without I²C Interface
Output Voltage
Rack: RCP-1U I
I: AC Inlet(IEC320-C14)
T: Terminal Block
Whole System: RCP-3K1U I - 12 - C
C: With I² C Interface
-: Without I²C Interface
Output Voltage
I: AC Inlet(IEC320-C14)
T: Terminal Block
SPECIFICATION - Single Unit
MODEL
RCP-1000-12
RCP-1000-24
RCP-1000-48
DC VOLTAGE
12V
24V
48V
RATED CURRENT
60A
40A
21A
CURRENT RANGE
0 ~ 60A
0 ~ 40A
0 ~ 21A
RATED POWER
720W
960W
1008W
RIPPLE & NOISE (max.) Note.2 150mVp-p
200mVp-p
300mVp-p
OUTPUT
VOLTAGE ADJ. RANGE
11.6 ~ 12.4V
VOLTAGE TOLERANCE Note.3 1.0%
LINE REGULATION
0.5%
LOAD REGULATION
0.5%
23.2 ~ 24.8V
1.0%
0.5%
0.5%
46.3 ~ 49.7V
1.0%
0.5%
0.5%
SETUP, RISE TIME
1000ms, 60ms/230VAC at full load
HOLD UP TIME (Typ.)
16ms/230VAC at full load
VOLTAGE RANGE
Note.5 90 ~ 264VAC 127 ~ 370VDC
FREQUENCY RANGE
47 ~ 63Hz
INPUT
EFFICIENCY (Typ.)
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
81%
8.5A/115VAC 4.5A/230VAC
COLD START 50A
87%
10.5A/115VAC
5.5A/230VAC
89%
11A/115VAC
5.5A/230VAC
LEAKAGE CURRENT
<1.1mA / 230VAC
OVERLOAD
PROTECTION OVER VOLTAGE
OVER TEMPERATURE
105 ~ 125% rated output power
Protection type : Constant current limiting, recovers automatically after fault condition is removed
13.2 ~ 16.2V
26.4 ~ 32.4V
52.8 ~ 64.8V
Protection type : Shut down o/p voltage, re-power on to recover
75 5 (TSW1) detect on heatsink of power transistor 85 5 (TSW2) detect on heatsink of power diode
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
File Name:RCP series-SPEC 2008-08-12