PSD-45 Datasheet, PDF (1/2 Pages) Mean Well Enterprises Co., Ltd. – 45W DC-DC Single Output Switching Power Supply

45W DC-DC Single Output Switching Power Supply
PSD-45 series
Features :
2:1 wide input range
Protections:Short circuit/Over load /Over voltage/Polarity
Cooling by free air convection
Built-in EMI filter, low ripple noise
100% full load burn-in test
Fixed switching frequency at 96KHZ
Low cost
High reliability
2 year warranty
SPECIFICATION
MODEL
PSD-45A-05 PSD-45B-05 PSD-45C-05 PSD-45A-12 PSD-45B-12 PSD-45C-12 PSD-45A-24 PSD-45B-24 PSD-45C-24
OUTPUT
INPUT
PROTECTION
ENVIRONMENT
DC VOLTAGE
RATED CURRENT
CURRENT RANGE
RATED POWER
RIPPLE & NOISE (max.) Note.2
VOLTAGE ADJ RANGE
VOLTAGE TOLERANCE Note.3
LINE REGULATION
LOAD REGULATION
SETUP, RISE, HOLD UP TIME
VOLTAGE RANGE
EFFICIENCY(Typ.)
DC CURRENT(Typ.)
OVER LOAD
OVER VOLTAGE
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
5V
6A
0 ~ 6A
30W
100mVp-p
5V
9A
0 ~ 9A
45W
5V
9A
0 ~ 9A
45W
12V
2.5A
0 ~ 2.5A
30W
120mVp-p
12V
3.75A
0 ~ 3.75A
45W
12V
3.75A
0 ~ 3.75A
45W
24V
1.25A
0 ~ 1.25A
30W
150mVp-p
24V
1.875A
0 ~ 1.875A
45W
4.5 ~ 5.5V
2.0%
1.0%
10.8 ~13.2V
2.0%
1.0%
21.6 ~ 26.4V
2.0%
0.5%
1.0%
1.0%
0.5%
1000ms, 50ms, ----/12VDC/24VDC at full load; 1500ms,50ms,----48VDC at full load
A: 9.2 ~18VDC (12VDC) B:18 ~ 36VDC (24VDC) C:36~72VDC(48VDC)
74%
77%
80%
78%
82%
83%
79%
85%
3.5A/12VDC 2.5A/24VDC 1.2A/48VDC
105% -160% rated output power
Protection type :shut down, Re-power on after fault condition is removed
5.75 ~ 6.75V/10%load
13.8~ 16.2V/10%load
27.6 ~ 32.4V/10%load
Protection type : Hiccup mode, recovery automatically after fault condition is removed
-10 ~ +60 (Refer to output load derating curve),20~90%RH non-condensing
20 ~ 95% RH non-condensing
-20 ~ +85 , 10 ~ 95% RH
0.05%/ (0 ~ 50 )
10 ~ 500Hz, 2G 10min./1cycle, Period for 60min.each along X, Y, Z axes
EN60950-1 CB approved by TUV
24V
1.875A
0 ~ 1.875A
45W
86%
SAFETY &
EMC
WITHSTAND VOLTAGE
I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC / 25 / 70% RH
EMI CONDUCTION&RADIATION ^{Compliance to EN55022(CISPR22) CLASS B}
EMS IMMUNITY
Compliance to EN61000-4-2, 3, 4, 6, 8 EN55024, EN61000-6-1 Light industry level, criteria A
OTHERS
NOTE
MTBF
329.3Khrs min. MIL-HDBK-217F (25 )
DIMENSION
127*76*30mm (L*W*H)
PACKING
0.19Kg;72pcs/15.6Kg/1.35CUFT
1.All parameters NOT specially mentioned are measured at normal input,rated load and 25 of ambient temperature.
2.Ripple & noise are measued at 20 MHz of bandwidth by using a 12inch twisted pair-wire termined with a 0.1uf & 47uf capacitor.
3.Tolerance:includes set up tolerance,line regulation and load regulation.
4.The interval of turning ON and OFF the power supply continuously is 2 seconds.
File Name:PSD-45 SPEC 2011-03-09