PSD-15 Datasheet, PDF (1/2 Pages) Mean Well Enterprises Co., Ltd. – 15W DC-DC Single Output Switching Power Supply

15W DC-DC Single Output Switching Power Supply
PSD-15 series
Features :
Protections:Short circuit/Over load /Over voltage/Polarity
Cooling by free air convection
100% full load burn-in test
Low cost
High reliability
1 year warranty
SPECIFICATION
MODEL
PSD-15A-05 PSD-15B-05 PSD-15C-05 PSD-15A-12 PSD-15B-12 PSD-15C-12 PSD-15A-24 PSD-15B-24 PSD-15C-24
OUTPUT
DC VOLTAGE
RATED CURRENT
CURRENT RANGE
RATED POWER
RIPPLE & NOISE (max.) Note.2
VOLTAGE TOLERANCE Note.3
LINE REGULATION
LOAD REGULATION
5V
3A
0 ~ 3A
15W
50mVp-p
2.0%
1.0%
1.0%
12V
1.25A
0 ~ 1.25A
15W
100mVp-p
2.0%
1.0%
1.0%
24V
0.6A
0 ~ 0.6A
14.4W
100mVp-p
2.0%
0.5%
0.5%
SETUP, RISE, HOLD UP TIME 2.5s, 25ms, ----/12VDC/24VDC/48VDC at full load
VOLTAGE RANGE
A: 9.2 ~18VDC (12VDC) B:18 ~ 36VDC (24VDC) C:36~72VDC(48VDC)
INPUT
EFFICIENCY(Typ.)
74%
78%
78%
67%
78%
78%
72%
78%
79%
DC CURRENT(Typ.)
1.9A/12VDC 0.9A/24VDC 0.45A/48VDC
OVER LOAD
PROTECTION
OVER VOLTAGE
WORKING TEMP.
105% -150% rated output power
Protection type : Hiccup mode ,recovery automatically after fault condition is removed
¡ ^{5.75 ~ 6.75V}
13.8~ 16.2V
-10 ~ +60 (Refer to output load derating curve)
27.6 ~ 32.4V
WORKING HUMIDITY
20 ~ 95% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY -20 ~ +85 , 10 ~ 95% RH
TEMP. COEFFICIENT
0.05%/ (0 ~ 50 )
VIBRATION
10 ~ 500Hz, 2G 10min./1cycle, Period for 60min.each along X, Y, Z axes
WITHSTAND VOLTAGE
I/P-O/P:2KVAC
SAFETY & ^{ISOLATION RESISTANCE}
I/P-O/P:100M Ohms/500VDC
EMC
EMI CONDUCTION&RADIATION Compliance to EN55022(CISPR22) CLASS B
EMS IMMUNITY
Compliance to EN61000-4-2, 3, 4, 6, 8 EN55024, EN61000-6-1 Light industry level, criteria A
OTHERS
DIMENSION
PACKING
94*49*25mm (L*W*H)
81mg;120pcs/10.72Kg
NOTE
1.All parameters NOT specially mentioned are measured at normal input,rated load and 25 of ambient temperature.
2.Ripple & noise are measued at 20 MHz of bandwidth by using a 12inch twisted pair-wire termined with a 0.1uf & 47uf capacitor.
3.Tolerance:includes set up tolerance,line regulation and load regulation.
File Name:PSD-15 SPEC 2005-11-04