PS-15 Datasheet, PDF (1/2 Pages) Mean Well Enterprises Co., Ltd. – 15W Single Output Switching Power Supply

15W Single Output Switching Power Supply
PS-15 series
Features :
Universal AC input / Full range
Low leakage current <0.5mA
Protections: Short circuit/Over load /Over voltage/Over temperature
Cooling by free air convection
100% full load burn-in test
Fix switching frequency at 67KHz
Low cost
High reliability
2 years warranty
SPECIFICATION
MODEL
PS-15-5
PS-15-12
PS-15-15
PS-15-24
PS-15-48
DC VOLTAGE
5V
12V
15V
24V
48V
RATED CURRENT
2.8A
1.25A
1A
0.625A
0.313A
CURRENT RANGE
0 ~ 2.8A
0 ~ 1.25A
0 ~ 1A
0 ~ 0.625A
0 ~ 0.313A
RATED POWER
14W
15W
15W
15W
15W
OUTPUT
RIPPLE & NOISE (max.) Note.2 100mVp-p
VOLTAGE TOLERANCE Note.3 2.0%
LINE REGULATION
1.0%
120mVp-p
2.0%
1.0%
120mVp-p
2.0%
1.0%
150mVp-p
2.0%
0.5%
200mVp-p
2.0%
0.5%
LOAD REGULATION
1.0%
1.0%
1.0%
0.5%
0.5%
SETUP, RISE TIME
5 ~ 24V:1200ms, 30ms 48V:1200ms, 75ms at full load
HOLD UP TIME(Typ.)
100ms at full load
VOLTAGE RANGE
85 ~ 264VAC 120 ~ 370VDC
FREQUENCY RANGE
47 ~ 63Hz
INPUT
EFFICIENCY(Typ.)
74%
77%
78%
79%
77%
AC CURRENT (Typ.)
0.4A/115VAC 0.2A/230VAC
INRUSH CURRENT (Typ.) COLD START 40A/230VAC
LEAKAGE CURRENT
<0.5mA / 240VAC
OVER LOAD
PROTECTION OVER VOLTAGE
OVER TEMPERATURE
Above 105% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
5.75 ~ 6.75V
13.8 ~ 16.2V
17.25 ~ 20.25V
27.6 ~ 32.4V
Tj 140 typically (U1) Detect on main control IC
Protection type : Hiccup mode, recovers automatically after fault condition is removed
55.2 ~ 64.8V
WORKING TEMP.
-10 ~ +60 (Refer to output load derating curve)
WORKING HUMIDITY
20 ~ 90% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY -20 ~ +85 , 10 ~ 95% RH
TEMP. COEFFICIENT
0.03%/ (0 ~ 50
VIBRATION
10 ~ 500Hz, 2G 10min./1cycle, Period for 60min.each along X, Y, Z axes
SAFETY STANDARDS
EN60950-1 CB Approved by TUV
WITHSTAND VOLTAGE
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
SAFETY & _{ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC}
EMC
(Note 4)
EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B
HARMONIC CURRENT
Compliance to EN61000-3-2,-3
EMS IMMUNITY
Compliance to EN61000-4-2,3,4,5,6,8,11 Light industry level, criteria A
OTHERS
NOTE
DIMENSION
94*49*25mm (L*W*H)
PACKING
0.083Kg; 120pcs/10.96Kg
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
File Name:PS-15-SPEC 2006-04-13