PS-05_09 Datasheet, PDF (1/2 Pages) Mean Well Enterprises Co., Ltd. – 5W Single Output Switching Power Supply

5W Single Output Switching Power Supply
PS-05 series
Features :
Universal AC input / Full range
Low leakage current <0.5mA
Protections: Short circuit/Over load /Over voltage/Over temperature
Cooling by free air convection
100% full load burn-in test
Fix switching frequency at 67KHz
Low cost
High reliability
2 years warranty
SPECIFICATION
MODEL
PS-05-5
PS-05-12
PS-05-15
PS-05-24
PS-05-48
DC VOLTAGE
5V
12V
15V
24V
48V
RATED CURRENT
1A
0.45A
0.35A
0.22A
0.11A
CURRENT RANGE
0 ~ 1.2A
0 ~ 0.5A
0 ~ 0.4A
0 ~ 0.25A
0 ~ 0.125A
RATED POWER
5W
5.4W
5.25W
5.28W
5.28W
OUTPUT
RIPPLE & NOISE (max.) Note.2 100mVp-p
VOLTAGE TOLERANCE Note.3 2.0%
LINE REGULATION
1.0%
120mVp-p
2.0%
1.0%
120mVp-p
2.0%
1.0%
200mVp-p
2.0%
0.5%
200mVp-p
1.0%
0.5%
LOAD REGULATION
1.0%
1.0%
1.0%
0.5%
0.5%
SETUP, RISE TIME
1000ms, 20ms
HOLD UP TIME(Typ.)
100ms at full load
VOLTAGE RANGE
85 ~ 264VAC 120 ~ 370VDC
FREQUENCY RANGE
47 ~ 63Hz
INPUT
EFFICIENCY(Typ.)
70%
75%
75%
76%
76%
AC CURRENT (Typ.)
0.15A/115VAC 0.07A/230VAC
INRUSH CURRENT (Typ.) COLD START 30A/230VAC
LEAKAGE CURRENT
<0.5mA / 240VAC
OVER LOAD
PROTECTION _{OVER VOLTAGE}
OVER TEMPERATURE
Above 105% rated output power
Protection type : Hiccup mode, recovery automatically after fault condition is removed
5.75 ~ 6.75V
13.8 ~ 16.2V
17.2 ~ 20.2V
27.6 ~ 32.4V
Protection type : shut off o/p voltage, clamping by zener diode
Tj 140 typically (U1) Detect on main control IC
Protection type : Hiccup mode, recovery automatically after fault condition is removed
55.2 ~ 64.8V
WORKING TEMP.
-10 ~ +60 (Refer to output load derating curve)
WORKING HUMIDITY
20 ~ 90% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY -20 ~ +85 , 10 ~ 95% RH
TEMP. COEFFICIENT
0.05%/ (0 ~ 50
VIBRATION
10 ~ 500Hz, 2G 10min./1cycle, Period for 60min.each along X, Y, Z axes
SAFETY STANDARDS
EN60950-1 CB Approved by TUV
WITHSTAND VOLTAGE
I/P-O/P:3KVAC
SAFETY & _{ISOLATION RESISTANCE I/P-O/P:100M Ohms/500VDC}
EMC
(Note 4)
EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B
HARMONIC CURRENT
Compliance to EN61000-3-2,-3
EMS IMMUNITY
Compliance to EN61000-4-2,3,4,5,6,8,11 Light industry level, criteria A
OTHERS
MTBF
DIMENSION
PACKING
1271.1Khrs min. MIL-HDBK-217F(25 )
75*40*20mm (L*W*H)
0.05Kg; 120pcs/6.25Kg/1CUFT
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
File Name:PS-05-SPEC 2009-07-03