PM-15_10 Datasheet, PDF (1/2 Pages) Mean Well Enterprises Co., Ltd. – 15W Output Switching Power Supply

15W Output Switching Power Supply
PM-15 series
Features :
Universal AC input / Full range
Protections: Short circuit / Overload / Over voltage
Ultra-miniature size, light weight
Cooling by free air convection
Isolation class
UL60601-1/IEC60601-1/EN60601-1 medical safety approved
No load power consumption<0.5W
100% full load burn-in test
Fixed switching frequency at 67KHz
High reliability
SPECIFICATION
3 years warranty
EN60601-1
IEC60601-1
MODEL
PM-15-3.3
PM-15-5
PM-15-12
PM-15-15
PM-15-24
OUTPUT
DC VOLTAGE
3.3V
5V
12V
RATED CURRENT
3.5A
3A
1.25A
CURRENT RANGE
0 ~ 3.5A
0 ~ 3A
0 ~ 1.25A
RATED POWER
11.55W
15W
15W
RIPPLE & NOISE (max.) Note.2 80mVp-p
80mVp-p
150mVp-p
VOLTAGE TOLERANCE Note.3 3.0%
2.0%
2.0%
LINE REGULATION
1.0%
1.0%
0.5%
LOAD REGULATION
1.0%
1.0%
1.0%
SETUP, RISE TIME
1000ms, 20ms/230VAC 1000ms, 20ms/115VAC at full load
HOLD UP TIME (Typ.)
100ms/230VAC 24ms/115VAC at full load
15V
1A
0 ~ 1A
15W
150mVp-p
2.0%
0.5%
1.0%
24V
0.63A
0 ~ 0.63A
15.12W
240mVp-p
2.0%
0.5%
0.5%
VOLTAGE RANGE
85 ~ 264VAC 120 ~ 370VDC
FREQUENCY RANGE
47 ~ 440Hz
INPUT EFFICIENCY (Typ.)
73%
76%
78%
79%
81%
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
0.35A/115VAC 0.2A/230VAC
COLD START 30A/115VAC 50A/230VAC
OVERLOAD
PROTECTION
OVER VOLTAGE
Above 105% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
3.8 ~ 4.95V
5.75 ~ 6.75V
13.8 ~ 16.2V
17.25 ~ 20.25V
Protection type : Shut off o/p voltage, clamping by zener diode
27.6 ~ 32.4V
WORKING TEMP.
-20 ~ +70 (Refer to output load derating curve)
WORKING HUMIDITY
20 ~ 90% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY ^{-40 ~ +85 , 10 ~ 95% RH}
TEMP. COEFFICIENT
0.03%/ (0 ~ 50
VIBRATION
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY STANDARDS
UL60950-1, UL60601-1, TUV EN60601-1, IEC60601-1 approved
SAFETY &
EMC
(Note 4)
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMI CONDUCTION & RADIATION
HARMONIC CURRENT
I/P-O/P:4KVAC
I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH
Compliance to EN55011(CISPR11),EN55022 (CISPR22) Class B
Compliance to EN61000-3-2,-3
EMS IMMUNITY
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, EN60601-1-2, EN61204-3, medical level, criteria A
MTBF
499.7Khrs min. MIL-HDBK-217F (25 )
OTHERS
NOTE
DIMENSION
75*53*22.7mm (L*W*H)
PACKING
0.14Kg; 120pcs/17.8Kg/0.97CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
File Name:PM-15-SPEC 2010-07-19