PLN-30 Datasheet, PDF (1/2 Pages) Mean Well Enterprises Co., Ltd. – 30W Single Output Switching Power Supply

30W Single Output Switching Power Supply
PLN-30 series
Features :
Universal AC input / Full range
Fully isolated plastic case with IP64 level
Built-in constant current limiting circuit with adjustable OCP level
Protections:Short circuit/Over load/Over voltage/Over temperature
Built-in active PFC function
IP64 design for indoor or outdoor installations
Cooling by free air convection
100% full load burn-in test
High reliability
Suitable for LED lighting and moving sign applications
2 years warranty
SPECIFICATION
LPS F 110 M M SELV
EQUIVALENT
IP64 ( except for 48V )
MODEL
PLN-30-9 PLN-30-12 PLN-30-15 PLN-30-20 PLN-30-24 PLN-30-27 PLN-30-36 PLN-30-48
OUTPUT
DC VOLTAGE
9V
12V
15V
20V
24V
CONSTANT CURRENT REGION Note.6 6.3 ~ 9V
8.4 ~ 12V
10.5 ~ 15V 14 ~ 20V
16.8 ~ 24V
RATED CURRENT
3.3A
2.5A
2A
1.5A
1.25A
CURRENT RANGE
0 ~ 3.3A
0 ~ 2.5A
0 ~ 2A
0 ~ 1.5A
0 ~ 1.25A
RATED POWER
29.7W
30W
30W
30W
30W
RIPPLE & NOISE (max.) Note.2 2.6Vp-p
2Vp-p
2.6Vp-p
2Vp-p
2.6Vp-p
VOLTAGE ADJ. RANGE Note.5 10%. Can be adjusted by internal potential meter SVR1
CURRENT ADJ. RANGE Note.5 3% ~ -25%. Can be adjusted by internal potential meter SVR2
VOLTAGE TOLERANCE Note.3 10%
LINE REGULATION
3.0%
LOAD REGULATION
10%
SETUP, RISE TIME
1500ms, 150ms / 230VAC 3000ms, 150ms / 115VAC at full load
27V
18.9 ~ 27V
1.12A
0 ~ 1.12A
30.24W
2.3Vp-p
36V
25.2 ~ 36V
0.84A
0 ~ 0.84A
30.24W
4.5Vp-p
48V
33.6 ~ 48V
0.63A
0 ~ 0.63A
30.24W
3.7Vp-p
VOLTAGE RANGE
90 ~ 264VAC 127 ~ 370VDC
FREQUENCY RANGE
47 ~ 63Hz
POWER FACTOR
PF>0.9/230VAC PF>0.95/115VAC at full load
INPUT EFFICIENCY(Typ.)
80%
83%
84%
84%
85%
85%
86%
86%
AC CURRENT
0.4A/115VAC 0.2A/230VAC
INRUSH CURRENT(max.) 40A/230VAC
LEAKAGE CURRENT
0.5mA / 240VAC
OVER CURRENT
110 ~ 120%
Note.4
Protection type : Constant current limiting, recovers automatically after fault condition is removed
SHORT CIRCUIT
Hiccup mode, recovers automatically after fault condition is removed.
PROTECTION
OVER VOLTAGE
10 ~ 14V
14 ~ 16V
17 ~ 22V
23 ~ 26V
27 ~ 34V
Protection type : Shut down o/p voltage, re-power on to recover
31 ~ 35V
40 ~ 50V
OVER TEMPERATURE
90 10 (TSW1)
Protection type : Shut down o/p voltage, re-power on to recover
53 ~ 63V
WORKING TEMP.
-30 ~ +50 (Refer to output load derating curve)
WORKING HUMIDITY
20 ~ 90% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80 , 10 ~ 95% RH
TEMP. COEFFICIENT
0.06%/ (0 ~ 50 )
VIBRATION
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY STANDARDS
TUV EN61347-1, EN61347-2-13, CAN/CSA C22.2 No. 223-M91(except for 48V), IP64 approved
WITHSTAND VOLTAGE
I/P-O/P:3KVAC
SAFETY & ISOLATION RESISTANCE _{I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH}
EMC
EMI CONDUCTION & RADIATION Compliance to EN55015
HARMONIC CURRENT
Compliance to EN61000-3-2 Class C (>80% load), Class D (>50% load) ; EN61000-3-3
EMS IMMUNITY
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, EN61547, light industry level, criteria A
MTBF
621.4Khrs min. MIL-HDBK-217F (25 )
OTHERS DIMENSION
145*47*30mm (L*W*H)
PACKING
0.22Kg; 60pcs/14.2Kg/1.25CUFT
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Please refer to OLP characteristics.
5. Output voltage can be adjusted through the SVR1 on the PCB; limit of output constant current level can be adjusted through the SVR2 on the PCB.
6. Constant current operation region is within 70% ~100% rated output voltage. This is the suitable operation region for LED related applications, but please
reconfirm special electrical requirements for some specific system design.
File Name:PLN-30-SPEC 2008-08-18