PLM-25 Datasheet, PDF (1/4 Pages) Mean Well Enterprises Co., Ltd. – 230VAC ONLY OR FULL RANGE(UP TO 295VAC) MODELS AVAILABLE

25W Single Output LED Power Supply
PLM-25 series
M
M
F ¹¹⁰
SELV IP30
■ Features
230VAC only or Full range (up to 295VAC)
models available
Built-in active PFC function
Constant current design
Protections:Short circuit
Cooling by free air convection
Fully isolated plastic case
Class Ⅱ power unit, no FG
Class 2 power unit(for PLM-25-500/700/1050)
No load power consumption <0.5W
High reliability,low cost
2 years warranty
(for Blank type only)
18
(for E type only)
■ Applications
Indoor LED lighting
LED office lighting
LED commercial lighting
LED decorative lighting
■ Description
PLM-25 is a 25W economical AC/DC LED power supply series. Incorporating a built-in active PFC
design, PLM-25 provides a high Power Factor value greater than 0.9. In addition, with the low no load
power consumption below 0.5W, and the setup time less than 500ms, PLM-25 is complied with the ErP
regulation required by European Union for lighting fixtures.
PLM-25 is a class Ⅱ(without FG pin) power unit housed with the UL 94V-0 rated flame retardant
plastic case. The I/O terminals are designed with screw-less clamp style terminal block that greatly
simplifies the wiring installation. Two types of models with different input voltage range are offered:
PLM-25 series, which operates from 110~295VAC, and PLM-25E series, which operates from
180~295VAC.These two series are both constant current output design, supplying models with the
current of 350mA, 500mA, 700mA and 1050mA, respectively.
■ Model Encoding
PLM - 25 E - 350
Output current
{ Blank: AC input range 110~295VAC
E:AC input range 180~295VAC
Output wattage
Series name
File Name:PLM-25-SPEC 2015-11-02