MWP-610 Datasheet, PDF (1/2 Pages) Mean Well Enterprises Co., Ltd. – 304W Triple Output for Video Game

304W Triple Output for Video Game
MWP-610
Features :
AC input range selected by switch
Economical video game power
Power ON-OFF switch
Protections: Short circuit / Overload / Over voltage / Over temperature
Forced air cooling by built-in DC fan
100% full load burn-in test
2 years warranty
SPECIFICATION
MODEL NO.
MWP-610
CHANNEL
CH1
CH2
CH3
DC VOLTAGE
5V
12V
24V
MINIMUM CURRENT
1.5A
1A
0.5A
RATED CURRENT (CONTINUOUS) 8A
8A
4.5A
PEAK CURRENT (10 min.) 8A
12A
5A
RATED POWER (CONTINUOUS) 244W
OUTPUT PEAK POWER (10 min.)
304W
RIPPLE & NOISE (max.) Note.2 80mVp-p
150mVp-p
200mVp-p
VOLTAGE TOLERANCE
5.0%
5.0%
5.0%
LINE REGULATION
1.0%
1.0%
1.0%
LOAD REGULATION Note.3 5.0%
5.0%
5.0%
HOLD UP TIME
12ms min. at full load
AC RECEPTACLE RATED (max.) 1A / 230VAC
VOLTAGE RANGE
100 ~ 132VAC / 200 ~ 264VAC selected by switch
FREQUENCY RANGE
47 ~ 63Hz
INPUT
EFFICIENCY (Typ.)
AC CURRENT
76%
8A / 115VAC 4.5A / 230VAC
INRUSH CURRENT (max.) 40A / 115VAC 80A / 230VAC
LEAKAGE CURRENT(max.) 3.5mA / 240VAC
OVERLOAD
105 ~ 200% rated output power
Protection type : Shut down o/p voltage, re-power on to recover
PROTECTION
OVER VOLTAGE
105 ~ 140% rated output voltage
Protection type : Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
WORKING TEMP.
-10 ~ +50 (Refer to output load derating curve)
WORKING HUMIDITY
20 ~ 90% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY -20 ~ +85 , 10 ~ 95% RH
TEMP. COEFFICIENT
0.05% / ( 0 ~ 50
VIBRATION
10 ~ 200Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY &
EMC
(Note 4)
SAFETY STANDARDS
Design refer to EN60950-1
WITHSTAND VOLTAGE
I/P-O/P, I/P-FG:1.5KVAC
ISOLATION RESISTANCE I/P-O/P, I/P-FG:50M Ohms / 500VDC / 25
EMI CONDUCTION & RADIATION Design refer to EN55022 class B
/ 70% RH
CONNECTOR
See page 2
OTHERS COOLING
Forced air ventilation by 8cm DC fan
DIMENSION
150*140*86mm (L*W*H)
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Load regulation is measured from 20% to 100% max. Load.
4. The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the
EMC directives.
File Name: MWP-610-SPEC 2010-04-28