MHB100 Datasheet, PDF (1/6 Pages) Mean Well Enterprises Co., Ltd. – 100W DC-DC Half-Brick Regulated Single Output Converter

M H B 1 0 0 ^{100W DC-DC Half-Brick Regulated Single Output Converter}
series
Features :
Half-brick size (2.28" 2.4" 0.5") with industry standard pin out
2:1 wide input range
Protections: Short circuit / Over current / Over voltage / Over temperature
High efficiency up to 89%
1500VDC I/O isolation
Built-in remote ON/OFF control
Built-in remote sense function
Trimming output 10%
Five-sided shield metal case
Optional heat sinks for extended operating temperature
Output 2.5V/3.3V/15V available
Approvals: UL / CUL / CE
3 years warranty
SPECIFICATION
MODEL
MHB100-24S05 MHB100-24S12 MHB100-24S24 MHB100-48S05 MHB100-48S12 MHB100-48S24
DC VOLTAGE
5V
12V
24V
5V
12V
24V
CURRENT RANGE
0 ~ 20A
0 ~ 8.3A
0 ~ 4.17A
0 ~ 20A
0 ~ 8.3A
0 ~ 4.17A
RATED POWER
100W
RIPPLE & NOISE (max.) Note.2 100mVp-p
150mVp-p
240mVp-p
100mVp-p
150mVp-p
240mVp-p
VOLTAGE ACCURACY Note.3 1.0%
OUTPUT
LINE REGULATION
0.2%
LOAD REGULATION
0.2%
SWITCHING FREQUENCY (Typ.) 500KHz
EXTERNAL TRIM ADJ. RANGE (Typ.) 10%
EXTERNAL CAPACITIVE LOAD (max.) 20000uF
8300uF
4170uF
20000uF
8300uF
4170uF
RATED DC INPUT
VOLTAGE RANGE
24VDC
18 ~ 36VDC
48VDC
36 ~ 75VDC
SURGE VOLTAGE (100ms max.) 50VDC
100VDC
INPUT
UNDER VOLTAGE LOCKOUT Power up: 17VDC, Power down: 16VDC
EFFICIENCY (Typ.)
84%
87%
FULL LOAD 5020mA
DC CURRENT _{NO LOAD 50mA}
4880mA
87%
4905mA
Power up: 34VDC, Power down: 32.5VDC
86%
89%
88%
2480mA
2445mA
2465mA
50mA
FILTER
Pi-network
OUTPUT OVER CURRENT
110 ~ 140% rated output power
Protection type : Over current limiting, recovers automatically after fault condition is removed
115 ~ 140% rated output voltage
PROTECTION OUTPUT OVER VOLTAGE (Typ.)
Protection type : Output voltage clamp
OUTPUT SHORT CIRCUIT Protection type : Can be continuous, recovers automatically after fault condition is removed
OVER TEMPERATURE
100 5 of case temperature
FUNCTION REMOTE CONTROL
OPERATING _{OUTPUT TRIMMING}
Please refer to "Remote ON/OFF Control" for details
10%, Please refer to "External Output Trimming" for details
WORKING TEMPERATURE (Typ.) -40 ~ +100 ; Thermal shutdown at 100 5 of case temperature (please refer to "Thermal Curve")
WORKING HUMIDITY
0% ~ 95% RH max.
ENVIRONMENT
STORAGE TEMP., HUMIDITY -55 ~ +105 , 0 ~ 95% RH
SAFETY &
EMC
(Note 4)
TEMP. COEFFICIENT
SAFETY STANDARDS
ISOLATION VOLTAGE
ISOLATION RESISTANCE
EMC EMISSION
0.03%/ (0~60
UL60950-1 approved
I/P-O/P:1500VDC, I/P-Case:1500VDC, O/P-Case:1500VDC
I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH
Compliance to EN55022 (CISPR22) Class A with external components (please refer to "EMC Suggestion Circuit")
OTHERS
NOTE
EMC IMMUNITY
Compliance to EN61000-4-2,3,4,5,6,8; EN55024, light industry level, criteria A
CASE MATERIAL
Aluminum
MTBF
900K hrs typ. MIL-HDBK-217F (25 )
DIMENSION
57.9*61*12.7mm (2.28"*2.40"*0.5") (L*W*H)
WEIGHT
95g
1. All parameters NOT specially mentioned are measured at 24,48VDC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 1uf ceramic & 10uf tantalum capacitor across output.
3. The power supply need to connect "+Vout" to "+R.S" and "-Vout" to "-R.S".
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”
File Name:MHB100-SPEC 2011-09-08