MES30B Datasheet, PDF (1/2 Pages) Mean Well Enterprises Co., Ltd. – 16.5~30WAC-DC Single Output and Medical Type Desktop

M E S 3 0 B ^{16.5~30W AC-DC Single Output and Medical Type Desktop}
series
Features :
Universal AC input / Full range
2 pole AC inlet IEC320-C8
Class power ( without earth pin)
Full output 3~48V safety approval
Protections: Short circuit / Overload / Over voltage / Over temp.
Fully enclosed plastic case
Fix switching frequency and regulation
Topology: Top switch circuit
LED indicator for power on
Approvals: UL / CUL / TUV / CB / CE
SPECIFICATION
2 years warranty
EN 60601-1
IEC 60601-1
ORDER NO.
MES30B-0P1J MES30B-1P1J MES30B-1-1P1J MES30B-2P1J MES30B-3P1J MES30B-4P1J MES30B-5P1J MES30B-6P1J MES30B-8P1J
SAFETY MODEL NO.
MES30B-0 MES30B-1 MES30B-1-1 MES30B-2 MES30B-3 MES30B-4 MES30B-5 MES30B-6 MES30B-8
DC VOLTAGE
Note.2 3.3V
5V
RATED CURRENT
5A
5A
7.5V
9V
12V
15V
18V
24V
48V
3.33A
3.33A
2.5A
2.0A
1.66A
1.25A
0.62A
CURRENT RANGE
0 ~ 5A
0 ~ 5A
0 ~ 3.33A 0 ~3.33A 0 ~ 2.5A 0 ~ 2.0A 0 ~ 1.66A 0 ~ 1.25A 0 ~ 0.62A
RATED POWER
16.5W
25W
25W
30W
30W
30W
30W
30W
30W
OUTPUT
RIPPLE & NOISE (max.) Note.3 30mVp-p 30mVp-p 40mVp-p
VOLTAGE ADJ. RANGE
Fixed
VOLTAGE TOLERANCE Note.4 8.0%
5.0%
4.0%
LINE REGULATION Note.5 1.0%
1.0%
1.0%
LOAD REGULATION Note.6 8.0%
5.0%
4.0%
SETUP, RISE, HOLD UP TIME 300ms, 50ms, 16ms at full load
50mVp-p
4.0%
1.0%
4.0%
50mVp-p
3.0%
1.0%
3.0%
60mVp-p
2.0%
1.0%
2.0%
70mVp-p
2.0%
1.0%
2.0%
80mVp-p
2.0%
1.0%
2.0%
100mVp-p
2.0%
1.0%
2.0%
VOLTAGE RANGE
90 ~ 264VAC 135 ~ 370VDC
FREQUENCY RANGE
47 ~ 63Hz
INPUT
EFFICIENCY (Typ.)
AC CURRENT
65%
70%
72%
74%
76%
78%
78%
80%
82%
0.8A / 100VAC
INRUSH CURRENT (max.) 35A / 230VAC
LEAKAGE CURRENT (max.) 0.1mA / 240VAC
OVERLOAD
PROTECTION OVER VOLTAGE
OVER TEMPERATURE
112 ~ 250% rated output power
150~350% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
110 ~ 140% rated output voltage
Protection type : Hiccup mode, recovers automatically after fault condition is removed
Tj 135 typically (IC1) detect on main control IC
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
WORKING TEMP.
WORKING HUMIDITY
0 ~ +65 (Refer to output load derating curve)
20% ~ 90% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY -20 ~ +85 , 10 ~ 95% RH
TEMP. COEFFICIENT
0.03% / ( 0 ~ 50 )
VIBRATION
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY STANDARDS
UL2601-1, IEC601-1, EN60601-1 approved
SAFETY &
EMC
(Note. 7)
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMI CONDUCTION & RADIATION
HARMONIC CURRENT
I/P-O/P: 5656VDC
I/P-O/P: 100M Ohms / 500VDC / 25 / 70% RH
Compliance to EN55011(CISPR11) class B
Compliance to EN61000-3-2,3
EMS IMMUNITY
MTBF
Compliance to EN60601-1-2 (EN61000-4-2,3,4,5,6,8,11), ENV50204, light industry level, criteria A
400Khrs min. MIL-HDBK-217F (25 )
OTHERS DIMENSION
PACKING
PLUG
CONNECTOR
CABLE
108*67*36mm (L*W*H)
0.3kg ; 54pcs/ 20kg / CARTON
Standard type P1J: 2.1 * 5.5 * 11mm, turning fork type, center positive for stock ; Other type available by customer requested
SPT-2 16AWG 4FT for 3.3 ~ 7.5V ; UL1185 18AWG 6FT for 9 ~48V
NOTE
1.All parameters are specified at 230VAC input, rated load, 25 70% RH ambient.
2.DC voltage: The output voltage set at point measure by plug terminal & 50% load.
3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
4.Tolerence: includes set up tolerance, line regulation, load regulation.
5.Line regulation is measured from low line to high line at rated load.
6.Load regulation is measured from 0% to 100% rated load.
7.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
File Name:MES30B-SPEC 2008-05-08