LPLC-18_1111 Datasheet, PDF (1/2 Pages) Mean Well Enterprises Co., Ltd. – 18W Single Output Switching Power Supply

18W Single Output Switching Power Supply
LPLC-18 series
SPECIFICATION
Features :
Constant current mode power supply
90-132VAC input only
Fully encapsulated with IP67 level (Note.6)
Protections:Short circuit / Over voltage / Over temperature
Cooling by free air convection
Class power unit, no FG
Pass LPS
100% full load burn-in test
Suitable for LED lighting and moving sign applications
High reliability / Low cost
2 years warranty
LPS IP67
(LVD)
MODEL
LPLC-18-350
LPLC-18-700
OUTPUT
RATED CURRENT
350mA
DC VOLTAGE RANGE
6~48V
RATED POWER
16.8W
RIPPLE & NOISE (max.) Note.2 300mVp-p
VOLTAGE TOLERANCE Note.3 5.0%
CURRENT ACCURACY
8.0%
700mA
6~25V
17.5W
250mVp-p
INPUT
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
HOLD UP TIME (Typ.)
VOLTAGE RANGE
FREQUENCY RANGE
EFFICIENCY(Typ.)
AC CURRENT
INRUSH CURRENT(max.)
LEAKAGE CURRENT
OVER VOLTAGE
PROTECTION
OVER TEMPERATURE
1.0%
3.0%
3600ms, 150ms / 115VAC
20ms/115VAC at full load
90 ~ 132VAC 127 ~ 186VDC
47 ~ 63Hz
82%
80%
0.5A/115VAC
Cold start 40A/115VAC
0.25mA / 120VAC
50.4~ 60V
28.75~ 33.75V
Protection type : Shut off o/p voltage, clamping by zener diode
Tj 140 t ypically (U1) Detect on main control IC
Protection type : Hiccup mode, recovers automatically after temperature goes down
WORKING TEMP.
WORKING HUMIDITY
-30~ +70 (Refer to "Derating Curve")
20 ~ 90% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80 , 10 ~ 95% RH
TEMP. COEFFICIENT
0.2%/ (0 ~ 50 )
VIBRATION
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY STANDARDS
IP67 approved; design refer to UL1310 Class 2,TUV EN60950-1, EN61347-2-13, CAN/CSA C22.2 No. 223-M91
SAFETY &
EMC
(Note 5)
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMC EMISSION
EMC IMMUNITY
I/P-O/P:3KVAC
I/P-O/P:>100M Ohms / 500VDC / 25 / 70% RH
Compliance to EN55022 (CISPR22) Class B, FCC Part 15, EN61000-3-2 Class A, EN61000-3-3
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A
MTBF
1200.6K hrs min. MIL-HDBK-217F (25 )
OTHERS DIMENSION
140*30*22(L*W*H)
NOTE
PACKING
0.175Kg; 70pcs/13.3Kgs/0.71CUFT
1. All parameters NOT specially mentioned are measured at 115VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Derating may be needed under low input voltage. Please check the static characteristic for more details.
5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
6. Suitable for indoor use or outdoor use without direct sunlight exposure.
File Name: LPLC-18-SPEC 2011-11-08