LPLC-18_11 Datasheet, PDF (1/2 Pages) Mean Well Enterprises Co., Ltd. – 18W Single Output Switching Power Supply

18W Single Output Switching Power Supply
LPLC-18 series
Features :
Constant current mode power supply
90-132VAC input only
Fully encapsulated with IP67 level (Note.6)
Protections:Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection
Pass LPS
100% full load burn-in test
Suitable for LED lighting and moving sign applications
High reliability / Low cost
2 years warranty
SPECIFICATION
LPS IP67
(LVD)
MODEL
LPLC-18-350
LPLC-18-700
OUTPUT
RATED CURRENT
350mA
DC VOLTAGE RANGE
6~48V
RATED POWER
16.8W
RIPPLE & NOISE (max.) Note.2 300mVp-p
VOLTAGE TOLERANCE Note.3 5.0%
LINE REGULATION
1.0%
LOAD REGULATION
3.0%
SETUP, RISE TIME
3600ms, 150ms / 115VAC
HOLD UP TIME (Typ.)
20ms/115VAC at full load
700mA
6~25V
17.5W
250mVp-p
VOLTAGE RANGE
90 ~ 132VAC 127 ~ 186VDC
FREQUENCY RANGE
47 ~ 63Hz
EFFICIENCY(Typ.)
82%
80%
INPUT
AC CURRENT
0.5A/115VAC
INRUSH CURRENT(max.) Cold start 40A/115VAC
LEAKAGE CURRENT
0.25mA / 120VAC
CURRENT LIMIT
PROTECTION OVER VOLTAGE
5% rated output current
Protection type : Constant current limiting type
50.4~ 60V
Protection type : Shut off o/p voltage, clamping by zener diode
28.75~ 33.75V
OVER TEMPERATURE
Tj 140 t ypically (U1) Detect on main control IC
Protection type : Hiccup mode, recovers automatically after temperature goes down
WORKING TEMP.
WORKING HUMIDITY
-30 ~ 70 (Refer to output load derating curve)
20 ~ 90% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80 , 10 ~ 95% RH
TEMP. COEFFICIENT
0.2%/ (0 ~ 50 )
VIBRATION
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY STANDARDS
IP67 approved; design refer to UL1310 Class 2,TUV EN60950-1, EN61347-2-13, CAN/CSA C22.2 No. 223-M91
SAFETY &
EMC
(Note 5)
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMI CONDUCTION & RADIATION
HARMONIC CURRENT
I/P-O/P:3KVAC
I/P-O/P:>100M Ohms / 500VDC / 25 / 70% RH
Compliance to EN55022 (CISPR22) Class A, FCC part15
Compliance to EN61000-3-2 Class A,EN61000-3-3
EMS IMMUNITY
MTBF
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A
1200.6K hrs min. MIL-HDBK-217F (25 )
OTHERS DIMENSION
140*30*22(L*W*H)
NOTE
PACKING
0.175Kg; 70pcs/13.3Kgs/0.71CUFT
1. All parameters NOT specially mentioned are measured at 115VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Derating may be needed under low input voltage. Please check the static characteristic for more details.
5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
6. Suitable for indoor use or outdoor use without direct sunlight exposure.
File Name: LPLC-18-SPEC 2011-03-09