LPLC-18-350 Datasheet, PDF (1/2 Pages) Mean Well Enterprises Co., Ltd. – 18W Single Output Switching Power Supply

18W Single Output Switching Power Supply
LPLC-18 series
Features :
90-132VAC input only
Fully encapsulated with IP67 level
Protections:Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection
Pass LPS
100% full load burn-in test
Suitable for LED lighting and moving sign applications
High reliability / Low cost
2 years warranty
SPECIFICATION
LPS IP67
(LVD)
MODEL
LPLC-18-350
LPLC-18-700
OUTPUT
DC VOLTAGE
48V
DC VOLTAGE RANGE
6~48V
RATED CURRENT
350mA
RATED POWER
16.8W
RIPPLE & NOISE (max.) Note.2 300mVp-p
VOLTAGE TOLERANCE Note.3 5.0%
LINE REGULATION
1.0%
LOAD REGULATION
3.0%
SETUP, RISE TIME
3600ms, 150ms / 115VAC
HOLD UP TIME (Typ.)
20ms/115VAC at full load
25V
6~25V
700mA
17.5W
250mVp-p
VOLTAGE RANGE
90 ~ 132VAC
FREQUENCY RANGE
47 ~ 63Hz
EFFICIENCY(Typ.)
82%
80%
INPUT
AC CURRENT
0.5A/115VAC
INRUSH CURRENT(max.) Cold start 40A/115VAC
LEAKAGE CURRENT
0.25mA / 120VAC
CURRENT LIMIT
Note.4 ^{5% rated output current}
Protection type : Constant current limiting type
PROTECTION OVER VOLTAGE
50.4~ 60V
Protection type : Shut off o/p voltage, clamping by zener diode
28.75~ 33.75V
OVER TEMPERATURE
Tj 140 t ypically (U1) Detect on main control IC
Protection type : Hiccup mode, recovers automatically after temperature goes down
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
-30 ~ 70 (Refer to output load derating curve)
20 ~ 90% RH non-condensing
-40 ~ +80 , 10 ~ 95% RH
0.2%/ (0 ~ 50 )
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
Design refer to UL1310 Class 2,TUV EN60950-1, EN61347-2-13, CAN/CSA C22.2 No. 223-M91, IP67 approved
SAFETY &
EMC
(Note 5)
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMI CONDUCTION & RADIATION
HARMONIC CURRENT
I/P-O/P:3KVAC
I/P-O/P:>100M Ohms / 500VDC / 25 / 70% RH
Compliance to EN55022 (CISPR22) Class A FCC part15
Compliance to EN61000-3-2,-3
EMS IMMUNITY
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A
MTBF
1200.6K hrs min. MIL-HDBK-217F (25 )
OTHERS DIMENSION
140*30*20(L*W*H)
PACKING
0.175Kg; 70pcs/13.3Kgs/0.66CUFT
NOTE
1. All parameters NOT specially mentioned are measured at 115VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4.Derating may be needed under low input voltage. Please check the derating curve for more details.
5. The power supply is considered a component which will be installed a final equipment.The final equipment must be re-confirmed that it still meets
EMC directive
File Name: LPLC-18-SPEC 2009-07-31