LPHC-18_11 Datasheet, PDF (1/2 Pages) Mean Well Enterprises Co., Ltd. – 18W Single Output Switching Power Supply

18W Single Output Switching Power Supply
LPHC-18 series
Features :
Constant current mode power supply
180-264VAC input only
Fully encapsulated with IP67 level (Note.6)
Protections:Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection
Pass LPS
100% full load burn-in test
Suitable for LED lighting and moving sign applications
High reliability / Low cost
2 years warranty
SPECIFICATION
LPS IP67
MODEL
LPHC-18-350
LPHC-18-700
OUTPUT
RATED CURRENT
350mA
DC VOLTAGE RANGE
6~48V
RATED POWER
16.8W
RIPPLE & NOISE (max.) Note.2 300mVp-p
VOLTAGE TOLERANCE Note.3 5.0%
LINE REGULATION
1.0%
LOAD REGULATION
3.0%
SETUP, RISE TIME
3600ms, 100ms / 230VAC
HOLD UP TIME (Typ.)
20ms/230VAC at full load
700mA
6~25V
17.5W
250mVp-p
VOLTAGE RANGE
180 ~ 264VAC 254 ~ 370VDC
FREQUENCY RANGE
47 ~ 63Hz
EFFICIENCY(Typ.)
80%
80%
INPUT
AC CURRENT
0.3A/230VAC
INRUSH CURRENT(max.) Cold start 50A/230VAC
LEAKAGE CURRENT
0.25mA / 240VAC
CURRENT LIMIT
PROTECTION OVER VOLTAGE
5% rated output current
Protection type : Constant current limiting type
50.4~ 60V
Protection type : Shut off o/p voltage, clamping by zener diode
28.75~ 33.75V
OVER TEMPERATURE
Tj 170 t ypically (U1) Detect on main control IC
Protection type : Hiccup mode, recovers automatically after temperature goes down
WORKING TEMP.
-30 ~ 70 (Refer to output load derating curve)
WORKING HUMIDITY
20 ~ 90% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80 , 10 ~ 95% RH
TEMP. COEFFICIENT
0.2%/ (0 ~ 50 )
VIBRATION
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY STANDARDS
IP67 approved; design refer to UL1310 Class 2,TUV EN60950-1, EN61347-2-13, CAN/CSA C22.2 No. 223-M91
SAFETY &
EMC
(Note 5)
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMI CONDUCTION & RADIATION
HARMONIC CURRENT
I/P-O/P:3KVAC
I/P-O/P:>100M Ohms / 500VDC / 25 / 70% RH
Compliance to EN55022 (CISPR22) Class A
Compliance to EN61000-3-2 Class A,EN61000-3-3
EMS IMMUNITY
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A
MTBF
1200.6K hrs min. MIL-HDBK-217F (25 )
OTHERS DIMENSION
140*30*22(L*W*H)
PACKING
0.175Kg; 70pcs/13.3Kgs/0.71CUFT
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Derating may be needed under low input voltage. Please check the static characteristic for more details.
5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
6. Suitable for indoor use or outdoor use without direct sunlight exposure.
File Name: LPHC-18-SPEC 2011-03-09