LPC-35 Datasheet, PDF (1/2 Pages) Mean Well Enterprises Co., Ltd. – 35W Single Output Switching Power Supply

35W Single Output Switching Power Supply
LPC-35 series
Features :
Constant current design
Universal AC input / Full range
Epoxy encapsulated with IP67 level
Withstand 300VAC surge input for 5 seconds
Protections: Short circuit / Over current / Over voltage
Fully isolated plastic case
Cooling by free air convection
UL1310 Class 2 power unit, pass LPS
100% full load burn-in test
Low cost, high reliability
Suitable for LED lighting and moving sign applications
SPECIFICATION
2 years warranty
LPS IP67
MODEL
LPC-35-700
LPC-35-1050
LPC-35-1400
DC VOLTAGE
48V
30V
24V
DC VOLTAGE RANGE
9 ~ 48V
9 ~ 30V
9 ~ 24V
CURRENT RANGE
700mA
1050mA
1400mA
RATED POWER
33.6W
31.5W
33.6W
OUTPUT
RIPPLE & NOISE (max.) Note.2 200mVp-p
VOLTAGE TOLERANCE Note.3 5.0%
LINE REGULATION
1.0%
200mVp-p
200mVp-p
LOAD REGULATION
2.0%
SETUP, RISE TIME Note.6 500ms, 120ms / 230VAC 500ms, 120ms / 115VAC at full load
HOLD UP TIME (Typ.)
50ms/230VAC 16ms/115VAC at full load
VOLTAGE RANGE
90 ~ 264VAC
INPUT
FREQUENCY RANGE
EFFICIENCY (Typ.)
AC CURRENT
47 ~ 63Hz
85%
1.1A/115VAC
0.7A/230VAC
INRUSH CURRENT(max.) COLD STAR 30A/115VAC 60A/230VAC
LEAKAGE CURRENT
0.25mA / 240VAC
CURRENT LIMIT
PROTECTION
OVER VOLTAGE
5% rated output current
Note.4
Protection type : Constant current limiting type
50.4 ~ 60V
31.5 ~ 40.5V
Protection type : Shut off o/p voltage, clamping by zener diode
27.6 ~ 32.4V
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
-30 ~ +75 (Refer to output load derating curve)
20 ~ 90% RH non-condensing
-40 ~ +80 , 10 ~ 95% RH
0.03%/ (0 ~ 50 )
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY STANDARDS
Design refer to UL1310 Class 2,TUV EN60950-1, EN61347-2-13, CAN/CSA C22.2 No. 223-M91, IP67 approved
SAFETY &
EMC
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMI CONDUCTION & RADIATION
HARMONIC CURRENT
I/P-O/P:3KVAC
I/P-O/P:>100M Ohms / 500VDC / 25 / 70% RH
Compliance to EN55022 (CISPR22) Class B
Compliance to EN61000-3-2,-3
EMS IMMUNITY
MTBF
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A
743.5Khrs min. MIL-HDBK-217F (25 )
OTHERS
NOTE
DIMENSION
148*40*30mm (L*W*H)
PACKING
0.34Kg; 40pcs/14.6Kg/0.63CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Derating may be needed under low input voltage. Please check the derating curve for more details.
5. The power supply is considered a component which will be installed a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.
File Name:LPC-35-SPEC 2008-09-11