LDV-185 Datasheet, PDF (1/3 Pages) Mean Well Enterprises Co., Ltd. – 185W Multiple Channel Output Switching Power Supply

L D V - 1 8 5 185W Multiple Channel Output Switching Power Supply
series
Features :
180~305VAC input range
Multiple channel with constant current output
Meet 4KV surge immunity level(EN61000-4-5)
Protections: Short circuit / Overload / Over voltage / Over temperature
Built-in active PFC function
Cooling by free air convection
IP67 design for indoor or outdoor installations
Optional timer dimming function
High efficiency up to 88.5%
-40 can power on
Suitable for LED lighting and moving sign applications
3 years warranty
IP67
LDV-185-350A
Blank : IP67 rated. No timer dimming function.
D: IP67 rated. Built in timer dimming function,contact MEAN WELL for details.
SPECIFICATION
MODEL
LDV-185-350A
LDV-185-350B
LDV-185-350C
LDV-185-700A
LDV-185-700B
LDV-185-700C
SINGELE CHANNEL
RATED CURRENT
350mA
350mA
350mA
700mA
700mA
700mA
DC VOLTAGE RANGE
32 ~ 38V
37 ~ 43V
42 ~ 51V
32~38V
37~43V
42~51V
OUTPUT ^{RATED POWER(max.) Note 3. 159.6W}
MAX CHANNEL
Note 3 12CH
180.6W
12CH
182W
12CH
159.6W
6CH
180.6W
6CH
182W
6CH
SETUP, RISE TIME Note 2. 2500ms, 50ms
HOLD UP TIME
10ms / 230VAC
CONSTANT CURRENT ACCURACY 5%
VOLTAGE RANGE
180~ 305VAC
FREQUENCY RANGE
47 ~ 63Hz
INPUT
POWER FACTOR
EFFICIENCY (Typ.)
PF>0.95/230VAC
Note 4. 88.5%
PF 0.9 at 75 ~ 100% load
AC CURRENT
1.5A/230VAC
INRUSH CURRENT(max.) COLD START 60A/230VAC
LEAKAGE CURRENT
<0.75mA / 240VAC
SHORT CIRCUIT
Channel shut down when each channel fault, re-power on to recovery
OVER VOLTAGE
PROTECTION
OVER TEMPERATURE
41 ~ 50V
47 ~ 50V
54 ~ 63V
41~50V
47~50V
Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery
100 10 (RTH2)
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
54~63V
OTP DIMMING
When the NTC (RTH3) temperature is higher than 95 PSU will enter dimming mode with decreasing output Io
WORKING TEMP.
-30 ~ +70 (Refer to output load derating curve),-40 can power on
WORKING HUMIDITY
20 ~ 95% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80 , 10 ~ 95% RH
TEMP. COEFFICIENT
0.03%/ (0 ~ 50 )
VIBRATION
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY STANDARDS
IP67 approved; Design refer to EN61347-1,EN61347-2-13,UL8750
WITHSTAND VOLTAGE
I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC 1minute
SAFETY &
EMC
ISOLATION RESISTANCE
EMI CONDUCTION & RADIATION
HARMONIC CURRENT
EMS IMMUNITY
I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH
Compliance to EN55015 Class B
Compliance to EN61000-3-2 Class C ( 75% load) ; EN61000-3-3
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN61547, EN55024, light industry level (surge 4KV), criteria A
MTBF
Khrs min. MIL-HDBK-217F (25 )
OTHERS DIMENSION
222.2*90*38.8mm (L*W*H)
PACKING
1.27 Kg; 12pcs/16.2Kg/1.02CUFT
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time.
3. Please do not beyond rated power when choosing channel quantity.
4. Efficiency is measured under 230VAC input with Pout>120W and each output channel connecting with the same quantity of LEDs(similar Vf sum).
5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
File Name:LDV-185-SPEC 2011-03-18