KDA-64 Datasheet, PDF (1/1 Pages) Mean Well Enterprises Co., Ltd. – KNX to DALI Gateway

KNX to DALI Gateway
KDA-64
■ Features :
· KNX proof gateway
· Easy configuration & installation
· Cost effective solution for smart building
· Connector up to 64 DALI ECGs/Drivers
· Built-in DALI power supply
· LCD 2x12 display
· Lighting control via the button
· Lighting control via the integrated web server
· ⁿ Up to 16 DALI lighting groups setting
· Up to 16 DALI scenes setting
· 3 year warranty
o _{■ Description :}
DALI Gateway brings together the crossfunctional KNX installation bus and the lighting control specific DALI-Bus (IEC 60929). Lights with
o _{cost-effective, digital DALI ECGs can therefore be integrated into an overall KNX architecture and operated via the multitude of existing}
KNX devices.
KDA-64 is a device used to control ECGs with a DALI interface via KNX. The device transforms switch and dim commands from the
S ^{connected KNX system into DALI telegrams and status information from the DALI bus into KNX telegrams.}
KDA-64 is a Category 1 device (in accordance with EN 62386-103). This means the device must only be used in DALI segments with
connected ECGs and not with other DALI control devices within the segment (No multi-master function).
Power supply for the up to 64 connected ECGs comes directly from the DaliControl e64. An additional DALI power supply is not required
and not permitted.
The device comes in a 4 units wide DIN Rail casing so it can be directly integrated into the mains distribution box. Connection to the KNX
g _{bus is via a bus connector. Network and DALI lines are connected via screw connectors on the device.}
ECGs can be switched, dimmed and set to a defined value in 16 groups per gateway. In addition to group control, KDA-64 offers the
possibility to individually control up to 64 ECGs.
in Madein
EU
SPECIFICATION
MODEL
m _OUTPUT/
SIGNAL
Co INPUT
KNX BUS VOLTAGE
DALI BUS VOLTAGE
DALI BUS RATED CURRENT
ETHERNET
TERMINAL
VOLTAGE RANGE
FREQUENCY RANGE
AC CURRENT
KDA-64
DC 24V SELV
Built-in DALI Voltage 16-20VDC ; Connect up to 64 DALI ECGs or LED Driver
250mA
100MB/s via RJ45 connector
Screw terminal for solid or stranded copper conductors 1,5mm²
110~240 VAC 155~339VDC
50~60Hz
0.1A
POWER CONSUMPTION 7W(Typ.)
TERMINAL
Screw terminal for solid or stranded copper conductors 1,5mm²
PROTECTION ^OVERLOAD
100% at DALI rated current
Protection type : Constant current limiting
OVERVOLTAGE
NA
DISPLAY
LC-Display of 2 lines with 12 characters each for comission the device and parameter setting
FUNCTION
KNX ADDRESSING
KNX INDICATION
One physical button to toggle between normal and addressing mode
One RED LED for indication
GENERIC SETTING
Three buttons(SCROLL, Prg/Set, ESC) on the front panel to set and view the settings
WORKING TEMP.
-5 ~ +45°C
ENVIRONMENT ^{WORKING HUMIDITY}
5 ~ 93% RH non-condensing ; comply with Weather EN 50090-2-2
STORAGE TEMP., HUMIDITY -25 ~ +70°C, 10 ~ 95% RH
VIB R ATI ON
10~500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY STANDARDS
Design refer to EN60950
SAFETY & ^{DALI STANDARDS}
EMC
EMC EMISSION
Comply with IEC60926, EN62386-103 DALI controller
Compliance to EN50081-1, EN50082-2, EN50090-2-2
EMC IMMUNITY
Compliance to EN61547
MTBF
xx Khrs min.
OTHERS
D I MEN SI ON
DIN RAIL MOUNTING
ENCLOSURE
86*70*55 mm (L*W*H)- Weight 0,200Kg
35 mm rail ; 4 units wide
ABS-V0
NOTE
1. It is not allowed to use other control devices (DALI-Master devices) within the same line.
File Name:KDA-64-SPEC 2015-04-03