HLG-120H_12 Datasheet, PDF (1/6 Pages) Mean Well Enterprises Co., Ltd. – 120W Single Output Switching Power Supply

120W Single Output Switching Power Supply
HLG-120H series
¡½ Features :
¡EUniversal AC input / Full range (up to 305VAC)
¡EBuilt-in active PFC function
¡EHigh efficiency up to 93.5%
¡EProtections: Short circuit / Over current / Over voltage / Over temperature
¡ECooling by free air convection
¡EOCP point adjustable through output cable or internal potentiometer
¡EIP67 / IP65 design for indoor or outdoor installations
¡EThree in one dimming function (1~10Vdc or PWM signal or resistance)
¡ESuitable for LED lighting and street lighting applications
¡ECompliance to worldwide safety regulations for lighting
¡ESuitable for dry / damp / wet locations
¡E5 years warranty (Note.9)
F ¹¹⁰ M M _{SELV IP65 IP67}
HLG-120H-12 A
Blank : IP67 rated. Cable for I/O connection.
A : IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer.
B : IP67 rated. Constant current level adjustable through output cable with 1~10Vdc or 10V PWM signal or resistance.
D (option) : IP67 rated. Timer dimming function, contact MEAN WELL for details.
SPECIFICATION
MODEL
HLG-120H-12 HLG-120H-15 HLG-120H-20 HLG-120H-24 HLG-120H-30 HLG-120H-36 HLG-120H-42 HLG-120H-48 HLG-120H-54
OUTPUT
DC VOLTAGE
12V
15V
20V
24V
RATED CURRENT
10A
8A
6A
5A
RATED POWER
120W
120W
120W
120W
RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p 150mVp-p 150mVp-p
VOLTAGE ADJ. RANGE Note.5 10.8 ~ 13.5V 13.5 ~ 17V 17 ~ 22V 22 ~ 27V
Can be adjusted by internal potentiometer A type only
CURRENT ADJ. RANGE
5 ~ 10A
4 ~ 8A
3 ~ 6A
2.5 ~ 5A
¡Ó VOLTAGE TOLERANCE Note.3 2.5%
¡Ó2.0%
¡Ó1.0%
¡Ó1.0%
LINE REGULATION
¡Ó0.5%
¡Ó0.5%
¡Ó0.5%
¡Ó0.5%
LOAD REGULATION
¡Ó2.0%
¡Ó1.5%
¡Ó0.5%
¡Ó0.5%
30V
4A
120W
200mVp-p
27 ~ 33V
2 ~ 4A
¡Ó1.0%
¡Ó0.5%
¡Ó0.5%
36V
3.4A
122.4W
200mVp-p
33 ~ 40V
1.7 ~ 3.4A
¡Ó1.0%
¡Ó0.5%
¡Ó0.5%
42V
2.9A
121.8W
200mVp-p
38 ~ 46V
1.4 ~ 2.9A
¡Ó1.0%
¡Ó0.5%
¡Ó0.5%
48V
2.5A
120W
200mVp-p
43 ~ 53V
1.2 ~ 2.5A
¡Ó1.0%
¡Ó0.5%
¡Ó0.5%
54V
2.3A
124.2W
200mVp-p
49 ~ 58V
1.1 ~ 2.3A
¡Ó1.0%
¡Ó0.5%
¡Ó0.5%
SETUP, RISE TIME Note.7 2500ms, 50ms at full load 230VAC / 115VAC ; B type 2500ms, 200ms at 95% load 230VAC / 115VAC
HOLD UP TIME (Typ.)
12ms at full load 230VAC / 115VAC
VOLTAGE RANGE Note.4 90 ~ 305VAC
FREQUENCY RANGE
47 ~ 63Hz
127 ~ 431VDC
POWER FACTOR (Typ.)
PF>0.98/115VAC, PF>0.95/230VAC, PF>0.93/277VAC at full load (Please refer to "Power Factor Characteristic" curve)
INPUT EFFICIENCY (Typ.)
92%
92%
93%
93%
93%
93%
93%
93.5%
93.5%
AC CURRENT (Typ.)
1.4A / 115VAC 0.6A / 230VAC 0.55A / 277VAC
INRUSH CURRENT (Typ.) COLD START 75A/230VAC
LEAKAGE CURRENT
<0.75mA / 277VAC
OVER CURRENT
SHORT CIRCUIT
PROTECTION
OVER VOLTAGE
OVER TEMPERATURE
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
95 ~ 108%
Protection type : Constant current limiting, recovers automatically after fault condition is removed
Constant current limiting, recovers automatically after fault condition is removed
14 ~ 17V 18 ~ 21V 23 ~ 27V 28 ~ 34V 34 ~ 38V 41 ~ 46V 47 ~ 53V
Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery
85¢J¡Ó10¢J (RTH2)
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
¢J -40 ~ +70 (Refer to "Derating Curve")
20 ~ 95% RH non-condensing
¢J -40 ~ +80 , 10 ~ 95% RH
¡Ó ¢J ¢J 0.03%/ (0 ~ 50 )
54 ~ 60V
59 ~ 65V
VIBRATION
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
UL8750, CSA C22.2 No. 250.0-08, EN61347-1, EN61347-2-13 independent IP65 or IP67, J61347-1, J61347-2-13 approved ;
SAFETY STANDARDS Note.6
design refer to UL60950-1, TUV EN60950-1
SAFETY & WITHSTAND VOLTAGE
EMC
ISOLATION RESISTANCE
EMC EMISSION
I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
¢J I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH
¡Ù Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2 Class C ( 50% load) ; EN61000-3-3
OTHERS
NOTE
EMC IMMUNITY
MTBF
Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge 4KV), criteria A
¢J 192.2K hrs min. MIL-HDBK-217F (25 )
DIMENSION
220*68*38.8mm (L*W*H)
¢J ^PACKING
1.12Kg; 12pcs/14.4Kg/0.8CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Derating may be needed under low input voltages. Please check the static characteristics for more details.
5. Type A only.
6. Safety and EMC design refer to EN60598-1, CNS15233, GB7000.1, FCC part18.
7. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time.
8. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
9. Refer to warranty statement.