GS25E_11 Datasheet, PDF (1/2 Pages) Mean Well Enterprises Co., Ltd. – 20~25WAC-DC Single Output Wall-mounted type

20~25W AC-DC Single Output Wall-mounted type
GS25E series
Features :
Universal AC input / Full range
No load power consumption<0.3W
ErP step2 compliant
Meet EISA 2007 (Energy Independence and Security Act)
2 pole EURO plug
Class power (without earth pin)
Protections: Short circuit / Overload / Over voltage
Fully enclosed plastic case
LED indicator for power on
Approvals: TUV / CB / CE
Pass LPS
2 years warranty
SPECIFICATION
ORDER NO.
GS25E05-P1J GS25E07-P1J GS25E09-P1J GS25E12-P1J GS25E15-P1J GS25E18-P1J GS25E24-P1J GS25E28-P1J GS25E48-P1J
OUTPUT
INPUT
SAFETY MODEL NO.
GS25E05 GS25E07 GS25E09 GS25E12 GS25E15 GS25E18
DC VOLTAGE
Note.2 5V
7.5V
9V
12V
15V
18V
RATED CURRENT
4.0A
2.93A
2.77A
2.08A
1.66A
1.38A
CURRENT RANGE
0 ~ 4.0A 0 ~ 2.93A 0 ~ 2.77A 0 ~ 2.08A 0 ~ 1.66A 0 ~ 1.38A
RATED POWER (max.)
20W
22W
25W
25W
25W
25W
RIPPLE & NOISE (max.) Note.3 50mVp-p 80mVp-p 80mVp-p 80mVp-p 100mVp-p 150mVp-p
VOLTAGE TOLERANCE Note.4 5.0%
5.0%
5.0%
3.0%
3.0%
3.0%
LINE REGULATION Note.5 1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
LOAD REGULATION Note.6 5.0%
5.0%
5.0%
3.0%
3.0%
3.0%
SETUP, RISE, HOLD UP TIME 500ms, 20ms, 50ms/230VAC 500ms, 20ms, 15ms/115VAC at full load
VOLTAGE RANGE
90 ~ 264VAC 135 ~ 370VDC
FREQUENCY RANGE
47 ~ 63Hz
EFFICIENCY (Typ.)
78.5%
81.5%
82.5%
84.5%
84.5%
84.5%
AC CURRENT
0.7A / 100VAC
INRUSH CURRENT (max.) 45A / 230VAC
LEAKAGE CURRENT(max.) 0.25mA / 240VAC
GS25E24
24V
1.04A
0 ~ 1.04A
25W
180mVp-p
2.0%
1.0%
2.0%
85.5%
GS25E28
28V
0.89A
0 ~ 0.89A
25W
240mVp-p
2.0%
1.0%
2.0%
85.5%
GS25E48
48V
0.52A
0 ~ 0.52A
25W
240mVp-p
2.0%
1.0%
2.0%
87%
OVERLOAD
PROTECTION
OVER VOLTAGE
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
SAFETY & ^{WITHSTAND VOLTAGE}
EMC
ISOLATION RESISTANCE
(Note. 7) _{EMC EMISSION}
EMC IMMUNITY
MTBF
OTHERS ^DIMENSION
PACKING
PLUG
CONNECTOR
CABLE
110 ~ 150% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
105 ~ 135% rated output voltage
Protection type : Clamp by zener diode
0 ~ +50 (Refer to "Derating Curve")
20% ~ 90% RH non-condensing
-20 ~ +85 , 10 ~ 95% RH
0.03% / (0 ~ 50 )
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
TUV EN60950-1 approved
I/P-O/P:4242VDC
I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH
Compliance to EN55022, EN61000-3-2,3
Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A
500Khrs min. MIL-HDBK-217F(25 )
79*54*33mm (L*W*H)
210g ; 60pcs / 13.5kg / CARTON
See page2
See page2
NOTE
1.All parameters are specified at 230VAC input, rated load, 25 70% RH ambient.
2.DC voltage: The output voltage set at point measure by plug terminal & 50% load.
3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
4.Tolerance: includes set up tolerance, line regulation, load regulation.
5.Line regulation is measured from low line to high line at rated load.
6.Load regulation is measured from 20% to 100% rated load
7.The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the
EMC directives.
File Name:GS25E-SPEC 2011-06-14