ES25C Datasheet, PDF (1/2 Pages) Mean Well Enterprises Co., Ltd. – 20~25WAC-DC Single Output Desktop

20~25W AC-DC Single Output Desktop
ES25C series
Features :
Universal AC input / Full range
3 pole AC inlet IEC320-C6
Class power ( with earth pin)
Full output 5~48V safety approval
Protections: Short circuit / Overload / Over voltage
Fully enclosed plastic case
PWM 3842 control circuit and regulated
LED indicator for power on
Approvals: UL / CUL / TUV / BSMI / CB / FCC / CE
1 year warranty
SPECIFICATION
TUV
Rheinland
Product Safety
geprUfre
Sicherheit
ORDER NO.
ES25C05-P1J ES25C07-P1J ES25C09-P1J ES25C12-P1J ES25C15-P1J ES25C18-P1J ES25C24-P1J ES25C28-P1J ES25C36-P1J ES25C48-P1J
SAFETY MODEL NO.
ES25C05-050 ES25C07-075 ES25C09-090 ES25C12-120 ES25C15-150 ES25C18-180 ES25C24-240 ES25C30-280 ES25C36-360 ES25C48-480
DC VOLTAGE
RATED CURRENT
Note.2 5V
4.0A
7.5V
2.93A
9V
2.77A
12V
2.08A
15V
1.66A
18V
1.38A
24V
1.04A
28V
0.89A
36V
0.69A
48V
0.52A
CURRENT RANGE
0.4 ~ 4.0A 0.3 ~ 2.93A 0.2 ~ 2.77A 0.1 ~ 2.08A 0.1 ~ 1.66A 0.1 ~ 1.38A 0.1 ~ 1.04A 0.1 ~ 0.89A 0.06 ~ 0.69A 0.05 ~ 0.52A
OUTPUT
RATED POWER (max.)
20W
22W
25W
RIPPLE & NOISE (max.) Note.3 50mVp-p 80mVp-p 80mVp-p
VOLTAGE TOLERANCE Note.4 5.0%
5.0%
5.0%
LINE REGULATION Note.5 1.0%
1.0%
1.0%
LOAD REGULATION Note.6 5.0%
5.0%
5.0%
SETUP, RISE, HOLD UP TIME 600ms, 50ms, 16ms at full load
VOLTAGE RANGE
90 ~ 264VAC 135 ~ 370VDC
25W
80mVp-p
3.0%
1.0%
3.0%
25W
100mVp-p
3.0%
1.0%
3.0%
25W
150mVp-p
3.0%
1.0%
3.0%
25W
180mVp-p
2.0%
1.0%
2.0%
25W
240mVp-p
2.0%
1.0%
2.0%
25W
240mVp-p
2.0%
1.0%
2.0%
25W
240mVp-p
2.0%
1.0%
2.0%
FREQUENCY RANGE
47 ~ 63Hz
INPUT
EFFICIENCY (Typ.)
AC CURRENT
70%
72%
76%
76%
78%
80%
82%
82%
82%
82%
0.7A / 100VAC
INRUSH CURRENT (max.) 40A / 230VAC
LEAKAGE CURRENT(max.) 0.75mA / 240VAC
OVERLOAD
PROTECTION
OVER VOLTAGE
110 ~ 150% rated output power
130 ~ 180% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
105 ~ 135% rated output voltage
Protection type : Shut down o/p voltage, re-power on to recover
WORKING TEMP.
0 ~ +50 (Refer to output load derating curve)
WORKING HUMIDITY
20% ~ 90% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY -20 ~ +85 , 10 ~ 95% RH
TEMP. COEFFICIENT
0.03% / (0 ~ 50 )
VIBRATION
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY STANDARDS
UL60950-1, CSA C22.2, TUV EN60950-1, BSMI CNS14336 Approved
SAFETY &
EMC
(Note. 7)
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMI CONDUCTION & RADIATION
HARMONIC CURRENT
I/P-O/P:3KVAC , I/P-FG:1.5KVAC
I/P-O/P, I/P-FG:100M Ohms / 500VDC / 25 / 70% RH
Compliance to EN55022 class B, FCC PART 15 / CISPR22 class B, CNS13438 class B
Compliance to EN61000-3-2,3
OTHERS
CONNECTOR
EMS IMMUNITY
MTBF
DIMENSION
PACKING
PLUG
CABLE
Compliance to EN61000-4-2,3,4,5,6,11, Light industry level, criteria A
500Khrs min. MIL-HDBK-217F(25 )
79*54*33mm (L*W*H)
220g ; 60pcs / 13.5kg / CARTON
Standard type P1J: 2.1 * 5.5 * 11mm, tuning fork type, center positive for stock ; Other type available by customer requested
Standard type UL1185 6ft (with ferrite core) for stock ; Other type available by customer requested
NOTE
1.All parameters are specified at 230VAC input, rated load, 25 70% RH ambient.
2.DC voltage: The output voltage set at point measure by plug terminal & 50% load.
3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
4.Tolerance: includes set up tolerance, line regulation, load regulation.
5.Line regulation is measured from low line to high line at rated load.
6.Load regulation is measured from 20% to 100% rated load
7.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
File Name:ES25C-SPEC 2007-03-01