EPS-65_11 Datasheet, PDF (1/3 Pages) Mean Well Enterprises Co., Ltd. – 65W Single Output Switching Power Supply

65W Single Output Switching Power Supply
EPS-65 series
Features :
Universal AC input / Full range
Optional L-Bracket and cover
High efficiency up to 90%
Protections: Short circuit / Overload / Over voltage
Cooling by free air convection
2" 4" compact size
LED indicator for power on
No load power consumption<0.3W
3 years warranty
EPS-65-3.3 C
=Blank,C ; Blank=PCB only, C=Enclosed type
SPECIFICATION
MODEL
EPS-65-3.3 EPS-65-5 EPS-65-7.5 EPS-65-12 EPS-65-15 EPS-65-24 EPS-65-36 EPS-65-48
DC VOLTAGE
3.3V
5V
7.5V
12V
15V
24V
36V
48V
RATED CURRENT
11A
11A
8A
5.42A
4.34A
2.71A
1.81A
1.36A
CURRENT RANGE
0 ~ 12A
0 ~ 12A
0 ~ 8.8A
0 ~ 6A
0 ~ 4.8A
0 ~ 3A
0 ~ 2A
0 ~ 1.5A
RATED POWER
36.3W
55W
60W
65.04W
65.1W
65.04W
65.16W
65.28W
PEAK LOAD(10sec.) Note.6 39.6W
60W
66W
72W
72W
72W
72W
72W
OUTPUT
RIPPLE & NOISE (max.) Note.2 80mVp-p
VOLTAGE ADJ. RANGE
3.1 ~ 3.6V
VOLTAGE TOLERANCE Note.3 3.0%
LINE REGULATION
0.5%
LOAD REGULATION
2.0%
80mVp-p
4.75 ~ 5.5V
2.0%
0.5%
1.0%
100mVp-p
7.13 ~ 8.25V
2.0%
0.5%
1.0%
120mVp-p
10.8 ~ 13.5V
2.0%
0.5%
1.0%
150mVp-p
13.5 ~ 16.5V
2.0%
0.5%
1.0%
240mVp-p
21.6 ~ 27V
1.0%
0.5%
1.0%
280mVp-p
32.4 ~ 39.6V
1.0%
0.5%
1.0%
300mVp-p
43.2 ~ 52.8V
1.0%
0.5%
1.0%
SETUP, RISE TIME
1000ms, 30ms/230VAC 1000ms, 30ms/115VAC at full load
HOLD UP TIME (Typ.)
50ms/230VAC 16ms/115VAC at full load
VOLTAGE RANGE Note.5 90 ~ 264VAC 127 ~ 370VDC
FREQUENCY RANGE
47 ~ 63Hz
INPUT
EFFICIENCY (Typ.)
80%
82%
84%
87%
88%
89%
89%
90%
AC CURRENT (Typ.)
1.8A/115VAC 1 A/230VAC
INRUSH CURRENT (Typ.) COLD START 60A/230VAC
LEAKAGE CURRENT
<1mA/240VAC
OVER LOAD
PROTECTION
OVER VOLTAGE
115 ~ 150% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
3.7 ~ 4.45V 5.6 ~ 6.75V 8.63 ~ 10.1V 13.8 ~ 16.2V 17.25 ~ 20.25V 27.6 ~ 32.4V
Protection type : Shut down o/p voltage, re-power on to recover
39.7 ~ 46.8V
53.3 ~ 64.8V
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
-30 ~ +70 (Refer to output load derating curve)
20 ~ 90% RH non-condensing
-40 ~ +85 , 10 ~ 95% RH
0.03%/ (0 ~ 50 )
VIBRATION
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY STANDARDS
UL60950-1, TUV EN60950-1 approved
SAFETY &
EMC
(Note 4)
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMI CONDUCTION & RADIATION
HARMONIC CURRENT
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH
Compliance to EN55022 (CISPR22) Class B
Compliance to EN61000-3-2,-3
EMS IMMUNITY
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, heavy industry level, criteria A
MTBF
Khrs min. MIL-HDBK-217F (25 )
OTHERS DIMENSION
PCB:101.6*50.8*28mm (L*W*H) ; with optional CASE:103.4*62*37mm (L*W*H)
PACKING
PCB: Kg; 96pcs/ Kg/0.89CUFT ; with optional CASE: Kg; 45pcs/ Kg/0.67CUFT
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
5. Derating may be needed under low input voltage. Please check the static characteristics for more details.
6. 33% Duty cycle maximum within every 30 seconds. Average output power should not exceed the rated power.
File Name:EPS-65-SPEC 2011-04-08