DLW05 Datasheet, PDF (1/1 Pages) Mean Well Enterprises Co., Ltd. – 5W DC-DC Regulated Dual Output Converter

5W DC-DC Regulated Dual Output Converter
DLW05 series
Features :
2:1 wide input range
4:1 wide input range(option)
1000VDC I/O isolation
3000VDC I/O isolation(option)
Built-in EMI filter
Protections: Short circuit / Overload
Cooling by free air convection
Six-sided shield metal case
100% burn-in test
Low cost / High reliability
Approvals: FCC / CE
SPECIFICATION
2 years warranty
ORDER NO.
DLW05A-05 DLW05B-05 DLW05C-05 DLW05A-12 DLW05B-12 DLW05C-12 DLW05A-15 DLW05B-15 DLW05C-15
DC VOLTAGE
CURRENT RANGE
5V
50 ~ 500mA
12V
20.8 ~ 208mA
15V
16.7 ~ 167mA
OUTPUT
RATED POWER
5W
RIPPLE & NOISE (max.)Note.2 50mVp-p
LINE REGULATION Note.3 0.2%
LOAD REGULATION Note.4 0.5%
VOLTAGE ACCURACY
2.0%
60mVp-p
60mVp-p
SWITCHING FREQUENCY
VOLTAGE RANGE
50KHz min.
A: 9 ~ 18VDC B: 18 ~ 36VDC C: 36 ~ 72VDC
INPUT
EFFICIENCY (Typ.)
DC CURRENT
FILTER
PROTECTION
75%
77%
77%
80%
82%
83%
81%
83%
85%
Full load A: 556mA B: 270mA C: 135mA
No load A: 33mA B: 16mA C: 10mA
Pi network
Fuse recommended
OVERLOAD
PROTECTION
(Note. 5)
SHORT CIRCUIT
160 ~ 250% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
All output equipped with short circuit
Protection type : Hiccup mode, recovers automatically after fault condition is removed
WORKING TEMP.
-25 ~ +71 (Refer to output load derating curve)
WORKING HUMIDITY
20% ~ 90% RH non-condensing
ENVIRONMENT ^{STORAGE TEMP., HUMIDITY -25 ~ +105 , 10 ~ 95% RH}
TEMP. COEFFICIENT
0.03% / (0 ~ 50 )
VIBRATION
10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes
WITHSTAND VOLTAGE
I/P-O/P:1KVDC
SAFETY & ISOLATION RESISTANCE I/P-O/P: 100M Ohms / 500VDC / 25 / 70% RH
EMC
EMI CONDUCTION & RADIATION Compliance to EN55022 Class B, FCC part 15 Class B
EMS IMMUNITY
Compliance to EN61000-4-2,3,4,5,6,8, light industry level, criteria A
MTBF
800khrs min. MIL-HDBK-217F(25 )
OTHERS DIMENSION
50.8*25.4*11.27mm or 2.0"*1.0"*0.44" inch (L*W*H)
WEIGHT
32g
Mechanical Specification
50.8
15.3
20.3
15.2
1
2
BOTTOM
3
4
5
VIEW
0.8 + 0.2/-0
Unit:mm
11.27
5.8
Pin Configuration
Pin no.
1
2
3
4
5
Output
Dual
+Vin
-Vin
+Vout
COM
-Vout
Derating Curve
100
80
NOTE
-25
0
25 50 60 71 100
Ta ( )
1.All parameters are specified at normal input, rated load, 25 70% RH Ambient.
2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
3.Line regulation is measured from low line to high line at rated load.
4.Load regulation is measured from 10% to 100% rated load.
5.Please prevent the converter from operating in overload or short circuit condition for more than 30 seconds.
File Name:DLW05-SPEC 2008-05-12