DKE10 Datasheet, PDF (1/1 Pages) Mean Well Enterprises Co., Ltd. – 10W DC-DC Regulated Dual Output Converter

10W DC-DC Regulated Dual Output Converter
DKE10 series
Features :
2:1 wide input range
4:1 wide input range(option)
1000VDC I/O isolation
3000VDC I/O isolation(option)
Built-in EMI filter
Protections: Short circuit / Overload
Cooling by free air convection
Six-sided shield metal case
100% burn-in test
Low cost / High reliability
Approvals: FCC / CE
SPECIFICATION
2 years warranty
ORDER NO.
DKE10A- DKE10B- DKE10C- DKE10A- DKE10B- DKE10C- DKE10A- DKE10B- DKE10C- DKE10A- DKE10B- DKE10C-
05
05
05
12
12
12
15
15
15
24
24
24
DC VOLTAGE
5V
12V
15V
24V
CURRENT RANGE
100 ~ 1000mA
42 ~ 420mA
33.3 ~ 333mA
21 ~ 210mA
RATED POWER
10W
RIPPLE & NOISE (max.) Note.2 50mVp-p
OUTPUT
LINE REGULATION Note.3 0.3%
60mVp-p
60mVp-p
80mVp-p
LOAD REGULATION Note.4 0.5%
VOLTAGE ACCURACY
2.0%
SWITCHING FREQUENCY 250KHz min.
VOLTAGE RANGE
A: 9 ~ 18VDC B: 18 ~ 36VDC C: 36 ~ 72VDC
EFFICIENCY (Typ.)
78%
81%
82%
80%
80%
83%
80%
80%
82%
82%
81%
85%
INPUT
DC CURRENT
Full load A: 1100mA B: 530mA C: 270mA
No load A: 30mA B: 16mA C: 8mA
FILTER
Pi network
PROTECTION
Fuse recommended
OVER CURRENT
PROTECTION
(Note. 5) _{SHORT CIRCUIT}
160% ~ 250% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
All output equipped with short circuit
Protection type : Hiccup mode, recovers automatically after fault condition is removed
WORKING TEMP.
WORKING HUMIDITY
-25 ~ +71 (Refer to output load derating curve)
20% ~ 90% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY -25 ~ +105 , 10 ~ 95% RH
TEMP. COEFFICIENT
0.03% / (0 ~ 50 )
VIBRATION
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
WITHSTAND VOLTAGE
I/P-O/P:1KVDC
SAFETY & _{ISOLATION RESISTANCE I/P-O/P: 100M Ohms / 500VDC / 25 / 70% RH}
EMC
EMI CONDUCTION & RADIATION Compliance to EN55022 Class B, FCC part 15 Class B
EMS IMMUNITY
MTBF
Compliance to EN61000-4-2,3,4,5,6,8, light industry level, criteria A
500Khrs min. MIL-HDBK-217F(25 )
OTHERS DIMENSION
50.8*25.4*11.2mm or 2"*1"*0.44" inch (L*W*H)
WEIGHT
32g
Mechanical Specification
50.8
15.3
20.3
3
1
4
2
BOTTOM VIEW ⁵
1.0 + 0.2/-0.1
Unit: mm
11.27
5.8
Pin Configuration
Pin No.
1
2
3
4
5
Output
+Vin
-Vin
+Vout
COM
-Vout
Derating Curve
100
80
-25
0 25 50 60 71 100
Ta ( )
NOTE
1.All parameters are specified at normal input, rated load, 25 70% RH Ambient.
2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
3.Line regulation is measured from low line to high line at rated load.
4.Load regulation is measured from 10% to 100% rated load.
5.Please prevent the converter from operating in overload or short circuit condition for more than 30 seconds.
File Name:DKE10-SPEC 2008-05-20