English
Language : 

MDT10F630 Datasheet, PDF (6/19 Pages) List of Unclassifed Manufacturers – 8-bit Micro-controller
MDT10F630
(8). 07H : Port C data output register
Port C
Bit 7
-
Bit 6
-
Bit 5
PC5
Bit 4
PC4
Bit 3
PC3
Bit 2
PC2
Bit 1
PC1
Bit 0
PC0
(9). 08 ~ 09H : Unimplemented Register.
(10).
0AH or 8AH : Program counter high byte.
PCHLAT
Bit 7
-
Bit 6
-
Bit 5
-
Bit 4
PCH4
Bit 3
PCH3
Bit 2
PCH2
Bit 1
PCH1
Bit 0
PCH0
(11). 0BH or 8BH : Interrupt control register.
INTS
Bit 7
GIS
Bit 6
PEIE
Bit 5
TIS
Bit 4
INTS
Bit 3
PAIE
Bit 2
TIF
Bit 1
INTF
Bit 0
PAIF
GIS : Global Interrupt Enable Bit.
0 = Disable all interrupts
1 = Enable all un-masked interrupts
PEIE : Peripheral Interrupt Enable Bit.
0 = Disable all peripheral interrupts
1 = Enable all peripheral interrupts
TIS : TMR0 Overflow Interrupt Enable Bit.
0 = Disable the Timer0 interrupt
1 = Enable the Timer0 interrupt
INTS : PA2/INT Interrupt Enable Bit.
0 = Disable the PA2/INT interrupt
1 = Enable the PA2/INT interrupt
PAIE : PA Port Change Interrupt Enable Bit.
0 = Disable the PA port change interrupt
1 = Enable the PA port change interrupt
TIF : TMR0 Overflow Interrupt Flag Bit.
0 = Timer0 did not overflowed
1 = Timer0 has overflowed (must be cleared in software)
INTF : PA2/INT Interrupt Flag Bit.
0 = The PA2/INT interrupt did not occur
1 = The PA2/INT interrupt occurred
PAIF : PA Port Change Interrupt Flag Bit.
0 = None of the PA5~0 pins have changed state
1 = When at least one of the PA5~0 pins changed state (must be cleared in software)
(12).
PIFB1
0CH : Peripheral interrupt register.
Bit 7
Bit 6 Bit 5
EEIF
-
-
Bit 4
-
Bit 3
CMIF
Bit 2
-
Bit 1
-
Bit 0
TMR1IF
This specification is subject to be changed without notice. Please visit our web site for the most updated information.
http://www.mdtic.com.tw
P.6
2008/4 Ver. 1.0