MDT10P5701 Datasheet, PDF (5/10 Pages) Micon Design Technology Corporation – 8-bit micro-controller

MDT10P5701
INTS(Interrupt Status Register):0BH
Bit Symbol
Function
0
RAIF
PA0.1.3 change interrupt flag. Set when PA0.1.3 inputs change.
1
INTF
Set when INT interrupt occurs. INT interrupt flag.
2
TIF
Set when TMR0 overflows.
3
RAIE
0: disable PA013 change interrupt.
1: enable PA013 change interrupt.
4
INTS
0: disable INT interrupt.
1: enable INT interrupt.
5
TIS
0: disable TMR0 interrupt.
1: enable TMR0 interrupt.
6
PEIE
0: disable all peripheral interrupt.
1: enable all peripheral interrupt.
7
GIS
0: disable global interrupt.
1: enable global interrupt.
PIFB1(Peripheral Interrupt Flag Bit):0CH
Bit Symbol
Function
A/D interrupt flag
6
ADIF
0: A/D conversion is not complete
1: A/D conversion completed
ADRES:1EH
A/D result register high byte.
ADS0(A/D Status Register):1FH
Bit Symbol
Function
0
ADRUN
0: A/D converter module is shut off and consumes no operating current
1: A/D converter module is operating
0: A/D conversion not in progress
2
GO/DONEB
1: A/D conversion in progress
4~3 CHS[1:0]
00: AIC0, 01: AIC1, 10: AIC2, 11: AIC3
7~6 ASCS[1:0]
01: fosc/8, 10: fosc/32, 11: fosc/32
This specification are subject to be changed without notice. Any latest information please preview
http;//www.mdtic.com.tw
P.5
2010/09 VER 1.1