MDT10P65 Datasheet, PDF (4/12 Pages) Micon Design Technology Corporation – 8-bit micro-controller

MDT10P65
Pin name Type Buffer type
Description
PB0/IQR I/O
PB1 I/O
PB2 I/O
PB3 I/O
PB4 I/O
PB5 I/O
PB6 I/O
PB7 I/O
PC0 I/O
PC1 I/O
PC2 I/O
PC3 I/O
PC4 I/O
PC5 I/O
PC6 I/O
PC7 I/O
PD0-PD7 I/O
PE0 I/O
PE1 I/O
PE2 I/O
Vdd
ST/TTL
TTL
TTL
TTL
TTL
TTL
TTL
TTL
ST
ST
ST
ST
ST
ST
ST
ST
ST
ST
ST
ST
Bi-directional I/O port B. Port B can be software
programmed for internal 25K ohm pull-up on all pins.
PB0-PB7 can generate interrupt on pin state change.
Can be the external interrupt pin.
Bi-directional I/O port C. Port C can be software
programmed for internal 100K pull-up on all pins.
Can be Timer1 oscillator output or Timer1 clock input.
Can be Timer1 oscillator input.
Bi-directional port. All pins can generate interrupt on pin
state change. Port D can be software programmed for
internal 100K pull-up on all pins.
Bi-directional port E. Port E can be software programmed
for internal 100K pull-up on all pins.
Power input
Vss
Ground pin
This specification are subject to be changed without notice. Any latest information
please preview http;//www.mdtic.com.tw
P. 4
2005/10 Ver. 1.6