MDT10P257 Datasheet, PDF (14/18 Pages) Micon Design Technology Corporation – 8-bit micro-controlle

MDT10P257
(G) Power Edge-detector Reset Voltage (Not in Sleep Mode) (PED :Enable)
V_{pr(Low level)}≦1.6~1.8 V
V_{pr(Mid level)}≦1.9~2.1 V
V_pr ﹕V_dd (Power Supply)
PS. If PED_Enable then Internal Power_on_reset will be off
(H) The basic WDT time-out cycle time
@Temperature＝25 ℃, the typical value as followings :
Vdd =5.0 V, Temperature=25℃,the typical value as followings:
Voltage (V) Basic WDT time-out cycle time (ms)
2.3
28.5
3.0
25.0
4.0
21.9
5.0
20.3
6.0
19.1
This specification are subject to be changed without notice. Any latest information please visit our web site
(http;//www.mdtic.com.tw) for detail
P. 14
2011/02 VER 1.1