MDT10P73BA Datasheet, PDF (13/22 Pages) Micon Design Technology Corporation – 8-bit micro-controller

T2PER: R92
Timer2 period
(38) SCMSTA: R94
MDT10P73(BA)
Bit Symbol
Function
0: Receive not complete
0
BF
1: Receive complete
I2C_UA 0:Address does not need to be updated.
1 (10 bit I2C 1:Indicates that the user needs to update the address in the sspadd
mode) register.
0:Write
2 I2C_RWB
1:Read
0:Start bit was not detected last.
3 I2C_START
1:Indicates that a start bit has been detected last.
0:Stop bit was not detected last.
4 I2C_STOP
1:Indicates that a stop bit has been detected last.
0:Indicates that the last byte received or transmitted was address.
5 I2C_DAB
1:Indicates that the last byte received or transmitted was data.
7~6
--
Unimplemented
(39) TXSC: R98
Bit Symbol
0
TX9DF 9^th bit of transmit data
Function
1
TSRCF 0: TSR full
1: TSR empty
2
HBRCF 0: Low speed
1: High speed
3
--
Unimplemented
4
UMSF 0: USART asynchronous mode
1: USART synchronous mode
5
TXENF 0: Transmit disable
1: Transmit enable
6 TX9ENF 0: Select 8-bit reception
1: Select 9-bit reception
7
CSSF 0: Slave mode
1: Master mode
(40) BRREG: R99
Baud rate register
This specification are subject to be changed without notice. Any latest information
please preview http;//www.mdtic.com.tw
P. 13
2008/6 Ver. 1.6