MDT10P74BB Datasheet, PDF (11/24 Pages) Micon Design Technology Corporation – 8-bit micro-controlle

MDT10P74(BB)
(27) RCREG: R1A
USART receive register
(28) CCP2L: R1B
Capture/Compare/PWM LSB
(29) CCP2H: R1C
Capture/Compare/PWM MSB
(30) CCP2CTL: R1D
Bit Symbol
Function
3~0 CCP2M3 0 0 0 0: CCP2 off
~
0 1 0 0: Capture2 mode, every falling edge
CCP2M0
0 1 0 1: Capture2 mode, every rising edge
0 1 1 0: Capture2 mode, every 4^th rising edge
0 1 1 1: Capture2 mode, every 16^th rising edge
1 0 0 0: Compare2 mode, set output on match
1 0 0 1: Compare2 mode, clear output on match
1 0 1 0: Compare2 mode, generate software interrupt on match
1 0 1 1: Compare2 mode, trigger special event
1 1 x x: PWM2 mode
5~4 PWM2LSB These bits are the two LSBs of the PWM2 duty cycle
7~6
--
Unimplemented
(31) ADRES: R1E
A/D result register high byte. The ADRES register is not a writable register.
(32) ADS0: R1F
Bit Symbol
Function
0
ADRUN 0: A/D converter module is shut off and consumes no operating current
1: A/D converter module is operating
1
--
Unimplemented
2 GO/DONEB 0: A/D conversion not in progress
1: A/D conversion in progress
This specification are subject to be changed without notice. Any latest information
please preview http;//www.mdtic.com.tw
P. 11
2010/10 Ver. 1.8