MDT10P611 Datasheet, PDF (1/16 Pages) Micon Design Technology Corporation – 8-bit micro-controller

MDT10P611
1. General Description
This EPROM-Based 8-bit micro-controller uses a fully
static CMOS technology process to achieve higher
speed and smaller size with the low power
consump-tion and high noise immunity. On chip memory
includes 1K words of ROM, and 64 bytes of static RAM.
-PB5~1 Interrupt on pin change
-PA5~0 Interrupt on pin change
-TMR1 and PR1 Compare
MDT10P611P12
MDT10P611S12
PINS I/O
14 12
14 12
OSC
IRC
8MHz/4MHz
2. Features
The followings are some of the features on the
hardware and software :
Fully CMOS static design
3. Applications
The application areas of this 10P611 range from
appliance motor control and high speed automotive to
low power remote transmitters/receivers, small
instruments, toy, automobile.
8-bit data bus
On chip ROM size : 1K words
Internal RAM size : 64 bytes
37 single word instructions
14-bit instructions
8-level stacks
Operating voltage : 2.5 V ~ 5.5 V
Built in 8MHz, 4MHz internal RC
Oscillator can be selected by programming
option:
INTRC－Internal 8MHz/4MHz
Addressing modes include direct, indirect and
relative
addressing modes
Power-on Reset
Power edge-detector Reset
Sleep Mode for power saving
8-bit real time clock/counter(RTCC) with 8-bit
programmable prescaler
Soft-ware I/O pull-up/down or open-drain control
On-chip RC oscillator based Watchdog
Timer(WDT)
Timer 1: 8-bit PWM/counter with 8 bit period
five interrupt source：
-External INT Pin (PB0)
-Timer0
This specification are subject to be changed without notice. Any latest information please preview
http://www.mdtic.com.tw
P. 1
2011/08 Ver. 1.0