MDT10P05BE Datasheet, PDF (1/16 Pages) Micon Design Technology Corporation – 8-bit micro-controller

MDT10P05(BE)
1. General Description
This EPROM-Based 8-bit micro-controller
uses a fully static CMOS design technology
combines higher speeds and smaller size
with the low power and high noise immunity.
On chip memory system includes 0.5 K
words of ROM, and 32 bytes of static RAM.
2. Features
The followings are some of the features on
the hardware and software :
about 10p ):
RC Low cost RC oscillator
LFXT Low frequency crystal oscillator
XTAL Standard crystal oscillator
HFXT High frequency crystal oscillator
u 4 oscillator start-up time can be
selected by programming option:
150 µs, 20 ms, 40 ms, 80 ms
u On-chip RC oscillator based Watchdog
Timer(WDT) can be operated freely
u 12 I/O pins with their own independent
direction control
u Fully CMOS static design
u 8-bit data bus
u On chip ROM size : 512 words
u Internal RAM size : 32 bytes
(25 general purpose registers, 7 special
registers)
u 36 single word instructions
u 14-bit instructions
u 2-level stacks
u Operating voltage : 2.3V ~ 6.0 V
u Operating frequency : 0 ~ 20 MHz
u The most fast execution time is 200 ns
under 20 MHz in all single cycle
instructions except the branch
instructions
u Addressing modes include direct,
indirect and relative addressing modes
u Power-on Reset
u Power edge-detector Reset
u Sleep Mode for power saving
u 8-bit real time clock/counter(RTCC) with
8-bit programmable prescaler
u 4 types of oscillator can be selected by
programming option (Internal Capacitor
3. Applications
The application areas of this MDT10P05
range from appliance motor control and
high speed automotive to low power remote
transmitters/receivers, pointing devices,
and telecommunications processors, such
as Remote controller, small instruments,
chargers, toy, automobile and PC
peripheral … etc.
This specification are subject to be changed without notice. Any latest information
please preview ttp;//www.mdtic.com.tw
P. 1
2005/6
VER1.3