SA5.0A Datasheet, PDF (1/3 Pages) Littelfuse – Silicon Avalanche Diodes - 500 Watt Axial Leaded Transient Voltage Suppressors

MDE Semiconductor, Inc.
78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : [phone] • Fax : [phone]
1-800-831-4881 Email: [e-mail] Web: www.mdesemiconductor.com
SA5.0 THRU SA180CA
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR
VOLTAGE-5.0 TO 180.0 Volts
500 Watt Peak Pulse Power
FEATURES
• Plastic package has Underwriters Laboratory
Flammability Classification 94 V-O
• Glass passivated junction
• 500W Peak Pulse Power
capability on 10/1000 µs waveform
• Glass passivated junction
• Low incremental surge resistance
• Excellent clamping capability
• Repetition rate (duty cycle): 0.01%
• Fast response time: typically less than
1.0 ps from 0 volts to BV for unidirectional and 5.0ns for
bidirectional and 5.0ns for bi directional
• Typical IR less than 1µA above 10V
• High temperature soldering guaranteed:
300°C/10 seconds/ .375", (9.5mm) lead
length, 5lbs., (2.3kg) tension
MECHANICAL DATA
Case: JEDEC DO-15 Molded plastic over glass passivated
junction
Terminals: Plated Axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denoted positive end (cathode)
except Bipolar
Mounting Position: Any
Weight: 0.015 ounces, 0.4 grams
DEVICES FOR BIPOLAR APPLICATIONS
For Bidirectional use C or CA Suffix for types SA5.0 thru types SA180 (e.g. SA5.0C, SA180CA)
Electrical characteristics apply in both directions.
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
RATING
Peak Pulse Power Dissipation on 10/1000 µs
waveform (NOTE 1, Fig.1)
Peak Pulse Current of on 10/1000 µs waveform (Note 1)
SYMBOL
P_PPM
I_PPM
VALUE
Minimum 500
SEE TABLE 1
Steady State Power Dissipation at TL = 75°C
lengths .375", 9.5mm (Note 2)
Lead
P_M(AV)
3.0
Peak Forward Surge Current, 8.3ms Single Half Sine-wave
Superimposed on Rated Load, Unidirectional only
I_FSM
70
(JEDEC Method)(Note 3)
Operatings and Storage Temperature Range
NOTES:
T_J, T_STG
-55 +175
1. Non-repetitive current pulse, per Fig.3 and derated above Ta=25 °C per Fig.2.
2. Mounted on Copper Pad area of 1.6x1.6" (40x40mm) per Fig.5.
3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle=4 pulses per minutes maximum.
UNITS
Watts
Amps
Watts
Amps
°C
Certified RoHS Compliant
UL File # E223026